|
16
|
1.50
|
Food-contact surfaces: cleaned & sanitized |
Yes |
No
|
No |
4-501.114 Maintain sanitizer at correct concentrations when being used to sanitize. -P For more information please visit: http://meck.co/FoodSafety Observed low QAC sanitizer at three compartment sink- 50ppm. CDI: Education provided and food employee replaced sanitizer container and primed- 150ppm. |
|
47
|
0
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
4-501.12 Resurface or replace cutting surfaces that can no longer be effectively cleaned and sanitized. Observed a few moderately scored cutting boards throughout. |
|
49
|
0.50
|
Non-food contact surfaces clean |
Yes |
No
|
No |
4-601.11(C ) Keep non food contact surfaces of equipment clean to avoid build up of dust, food residue or debris.4-602.13 Non food contact surfaces of equipment shall be cleaned frequently to preclude accumulation of soil residues. Observed metal insert pan used for storing clean utensils at front line soiled with food waste/residue. CDI: PIC provided new insert pans. |
|
55
|
0
|
Physical facilities installed, maintained & clean |
No |
No
|
No |
6-501.12 Floors, walls, ceilings including the attachments such as soap, towel dispensers; light fixtures; and heat/ac vent covers shall be clean. Caution should be used to minimize food exposure. Observed standing water in front of 3-door cooler. Food employee stated new cooler is to be ordered soon- current cooler causing standing water/excessive condensation. |