|
|
| CDI=Corrected During Inspection | |
R=Repeat Violation | |
VR=Verification Required | |
|
|
| Violation Item
| Demerits
| Violation Description
| CDI | R | VR |
|
|
10
|
0
|
Handwashing sinks supplied & accessible |
Yes |
No
|
No |
6-301.11 Provide soap for handwashing at each handsink. -Pf. Observed hand sink at cook line without soap. CDI: PIC placed soap at hand sink. |
|
15
|
0
|
Food separated & protected |
Yes |
No
|
No |
3-302.11(A)(1) Separate raw animal foods from ready-to-eat foods and washed/unwashed fruits and vegetables. -P. Observed prepped portions of raw steak in same container as cooked potatoes inside reach in freezer. CDI: Steak was relocated.
For more information on food storage order please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation |
|
16
|
1.50
|
Food-contact surfaces: cleaned & sanitized |
Yes |
No
|
No |
4-601.11(A) Equipment food contact surfaces and utensils shall be clean to sight and touch. -Pf. Observed multiple plates, ladles and tongs soiled with food debris while being stored as clean. CDI: All items were placed to be washed /rinsed/ sanitized.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: Sanitizing Solutions - https://youtu.be/ykP2mr9CtRg , How to Test Sanitizer https://youtu.be/y0SjmnabFaY , and Cleaning and Sanitizing Food Contact Surfaces https://youtu.be/av1Rbh-lh08 . |
|
23
|
1.50
|
Proper date marking & disposition |
Yes |
No
|
No |
3-501.17 Date mark/label all TCS foods that are ready-to-eat once opened or prepared and held more than 24hrs. -Pf. Observed cut cabbage, canned bamboo, cooked chicken, shrimp tempura and egg rolls in prep units without dates. PIC stated items were prepared yesterday. CDI: All items were dated.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Date Marking Food Safely https://youtu.be/BOPsSNUajYs . |
|
28
|
1
|
Toxic substances properly identified stored & used |
Yes |
Yes
|
No |
REPEAT
7-102.11 Label working containers of toxic materials such as cleaners and sanitizers.-Pf. Observed two sanitizer buckets not labeled. CDI: PIC labeled buckets. |
|
33
|
1
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
Yes
|
No |
REPEAT
3-501.15 Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths and active stirring. Cold air must flow around product to remove the heat. -Pf. Observed pork and tofu cooling at a rate of 0F/min, both items were cooling inside a prep unit, pork was covered with a lid. CDI: Items were placed in walk in cooler to cool.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Cooling Food Safely https://youtu.be/P6x8b1ZVOxU . |
|
35
|
1
|
Approved thawing methods used |
Yes |
Yes
|
No |
3-501.13 (E ) Reduced oxygen packaged fish, required to be kept frozen until time of use per labeling, shall be removed from the reduced oxygen environment prior to thawing under refrigeration or upon completion of thawing using running water. Observed container filled with packages of crab and tilapia thawing in walk in cooler with ROP packaging still intact. REPEAT
3-501.13 (A), (B), (C ) Use approved thawing methods. Pf. Observed 8 packages of chicken thawing in prep sink at room temperature. All items were between 54F-66F. PIC stated the items have been thawing since last night. CDI: PIC voluntarily discarded items. |
|
49
|
1
|
Non-food contact surfaces clean |
No |
Yes
|
No |
REPEAT
4-601.11(C ) Keep non food contact surfaces of equipment clean to avoid build up of dust, food residue or debris.4-602.13 Non food contact surfaces of equipment shall be cleaned frequently to preclude accumulation of soil residues. Observed build of food debris on sides of equipment throughout facility. |
|