|
16
|
3
|
Food-contact surfaces: cleaned & sanitized |
Yes |
Yes
|
No |
REPEAT
4-501.114 Maintain sanitizer at correct concentrations when being used to sanitize. -P. Observed dish machine at 0ppm after running multiple cycles. CDI: PIC changed chlorine container, line was primed, new concentration is 50ppm.
For more information please visit: http://meck.co/FoodSafety or view our training videos at the following weblinks: Sanitizing Solutions - https://youtu.be/ykP2mr9CtRg and How to Test Sanitizer https://youtu.be/y0SjmnabFaY |
|
28
|
0
|
Toxic substances properly identified stored & used |
Yes |
No
|
No |
7-102.11 Label working containers of toxic materials such as cleaners and sanitizers.-Pf. Observed bottle of cleaner without label. CDI: PIC labeled container. |
|
33
|
0.50
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
No
|
No |
3-501.15 Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths and active stirring. Cold air must flow around product to remove the heat. -Pf. Observed chicken cooling at a rate of 0.01F/min in container covered with Saran Wrap and a lid inside walk in cooler. CDI: PIC placed item in walk in freezer to quickly cool.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Cooling Food Safely https://youtu.be/P6x8b1ZVOxU . |
|
35
|
0.50
|
Approved thawing methods used |
No |
Yes
|
No |
REPEAT
3-501.13 (E ) Reduced oxygen packaged fish, required to be kept frozen until time of use per labeling, shall be removed from the reduced oxygen environment prior to thawing under refrigeration or upon completion of thawing using running water. Observed container of crab, and tuna thawing in walk in cooler with ROP packaging still intact. |
|
47
|
0
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
4-501.12 Resurface or replace cutting surfaces that can no longer be effectively cleaned and sanitized. Observed cutting boards with deep cuts and grooves. |
|
49
|
1
|
Non-food contact surfaces clean |
No |
Yes
|
No |
REPEAT
4-601.11(C ) Keep non food contact surfaces of equipment clean to avoid build up of dust, food residue or debris.4-602.13 Non food contact surfaces of equipment shall be cleaned frequently to preclude accumulation of soil residues. Observed reach in freezer with food debris and dust build up on ventilation inside walk in cooler. Clean as needed. |