|
8
|
0
|
Hands clean & properly washed |
Yes |
No
|
No |
2-301.12 (A),(B) Wash hands for at least 20 seconds. Follow the cleaning procedure to adequately wash your hands. Use warm water, soap, scrub 10 to 15 seconds, rinse, and immediately follow the cleaning procedure with thorough hand drying method (ex. Disposable Paper Towel). -P- Observed employee turn off water without using protective barrier such as paper towel to prevent recontamination of hands. Corrected during the inspection (CDI) - employee was instructed on proper procedure. |
|
22
|
3
|
Proper cold holding temperatures |
Yes |
Yes
|
No |
3-501.16(A)(2) Maintain TCS foods in cold holding at 41F or less. -P- Observed pate above 41F during the inspection. Pate was placed in the freezer to reach proper cold holding temperature. |
|
33
|
0.50
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
No
|
No |
3-501.15 Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths and active stirring. Cold air must flow around product to remove the heat. -Pf- Observed pasta in deep metal pan with lid closed in the small reach-in cooler to cool. Explained to employee about proper techniques to allow items to cool properly. CDI - Pasta was placed in larger reach-in cooler and the lid was removed until 41F or less is reached. |
|
47
|
1
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
Yes
|
No |
4-501.11 Maintain equipment in good repair. - Observed gaskets torn in reach-in cooler where half and half is stored. |
|
55
|
0.50
|
Physical facilities installed, maintained & clean |
No |
No
|
No |
6-101.11/6-201.11 Floors, walls and ceilings shall be designed, constructed, and installed so they are smooth and easily cleanable. Floors shall be non-absorbent in areas subject to moisture. - Observed floor tiles cracked in the dish area. |