|
16
|
0
|
Food-contact surfaces: cleaned & sanitized |
Yes |
No
|
No |
4-703.11 After cleaning, equipment, food contact surfaces, and utensils shall be sanitized using an approved method.-P
Observed three compartment sink drain plugs missing, inhibiting sink’s ability to be filled up with sanitizer. PIC stated they have been using a large bowl full of sanitizer for equipment cleaning. Bowl provided was not large enough to fully submerge larger equipment, like cutting boards.
CDI - REHS and PIC found alternative method to plug drain during inspection. REHS educated PIC on proper utensil submersion while sanitizing.
0 pts.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: Sanitizing Solutions - https://youtu.be/ykP2mr9CtRg , How to Test Sanitizer https://youtu.be/y0SjmnabFaY , and Cleaning and Sanitizing Food Contact Surfaces https://youtu.be/av1Rbh-lh08 . |
|
22
|
3
|
Proper cold holding temperatures |
Yes |
Yes
|
No |
3-501.16(A)(2) Maintain TCS foods in cold holding at 41F or less. -P
Observed various TCS foods holding above 41F in grab n go unit during inspection. See temperature chart. Ambient in unit 41F.
CDI - All out of temperature foods voluntarily discarded. REHS advised facility to store TCS foods in adjacent unit with door due to rising weather temperatures.
Repeat. 3 pts.
For more information, please visit: www.mecknc.gov/foodsafety or view our training videos at the following weblinks: What are TCS Foods https://www.youtube.com/watch?v=q0iLZb7v0UM and Safe Food Temperatures https://youtu.be/tXP09IK-1TQ . |
|
28
|
0
|
Toxic substances properly identified stored & used |
Yes |
No
|
No |
7-204.11 Provide sanitizer at correct concentrations, diluting as required.-P
Observed sanitizer dispensing above safe levels during inspection.
CDI - Maintenance contacted during inspection. Facility to dilute and test sanitizer until repair.
0 pts. |
|
33
|
1
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
Yes
|
No |
3-501.15 Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths and active stirring. Cold air must flow around product to remove the heat. -Pf
Observed cut watermelon cooling while in a sealed plastic container. Watermelon was not cooling hastily.
CDI - Container lids opened during inspection. Watermelon began cooling rapidly.
Repeat. 1 pt.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Cooling Food Safely https://youtu.be/P6x8b1ZVOxU . |
|
36
|
0.50
|
Thermometers provided & accurate |
No |
No
|
Yes |
4-302.12 Provide an accessible thermometer for use. Provide a thin probe thermometer for accurate measure of thin foods.-Pf .
Observed no thin probed thermometer on site during inspection. Acquisition necessary.
10 day VR required.
0.5 pts. |