|
10
|
0
|
Handwashing sinks supplied & accessible |
Yes |
No
|
No |
5-205.11 (A),(B) Maintain access to handsinks. Handsinks may only be used for handwashing.-Pf Observed hand washing sink blocked with a cart upon arrival to inspection. Allow accessibility for use at hand washing. CDI- Cart was moved by REHS. |
|
22
|
3
|
Proper cold holding temperatures |
Yes |
Yes
|
No |
3-501.16(A)(2) Maintain TCS foods in cold holding at 41F or less. -P All time and temperature controlled foods kept for cold holding shall maintain a temperature threshold of 41F or below. Observed cut melons in display case at 45F. CDI- Cut melons were moved to walk in cooler to be brought in to temperature. Ensure that food are stored below fill line to maintain temperature. |
|
47
|
0.50
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
Yes
|
No |
4-501.11 Maintain equipment in good repair. Observed 3 compartment sink not mixing sanitizer or soap at the sink. Food establishment currently are using the meat market for dish washing. |
|
49
|
0.50
|
Non-food contact surfaces clean |
No |
Yes
|
No |
4-601.11(C ) Keep non food contact surfaces of equipment clean to avoid build up of dust, food residue or debris. 4-602.13 Non food contact surfaces of equipment shall be cleaned frequently to preclude accumulation of soil residues. Additional cleaning needed to food scales used to weigh fruits and vegetables. |
|
55
|
0
|
Physical facilities installed, maintained & clean |
No |
No
|
No |
6-501.11 Floors, walls, and ceilings including the attachments such as soap and towel dispensers; light fixtures; and heat/ac vents shall be maintained in good repair. Observed damaged wall leading to walk in cooler. Repair bulging wall that leads to walk in cooler. |
|
56
|
0.50
|
Meets ventilation & lighting requirements; designated areas used |
No |
No
|
No |
6-501.14 Change the filters and clean the intake and exhaust air ducts so they are not a source of contamination by dust, dirt or other materials. Observed build up in the cutting room on unit returns. Recommend a higher cleaning frequency. |