|
|
| CDI=Corrected During Inspection | |
R=Repeat Violation | |
VR=Verification Required | |
|
|
| Violation Item
| Demerits
| Violation Description
| CDI | R | VR |
|
|---|
|
3
|
0
|
Management, food & conditional employee; knowledge, responsibilities & reporting |
Yes |
No
|
No |
2-103.11(O) Ensure food employees are informed of their responsibility to report required symptoms, illnesses and exposure.-PF Observed poster on wall for employee health information. PIC demonstrated knowledge on the illnesses and symptoms. Health policy was missing exclusion and restriction portion. CDI: EHS supplied PIC with updated health policy with sufficient information included for compliance.
For more information on employee health policy, please visit: www.mecknc.gov/foodsafety |
|
16
|
1.50
|
Food-contact surfaces: cleaned & sanitized |
Yes |
No
|
No |
4-601.11(A) Equipment food contact surfaces and utensils shall be clean to sight and touch. -Pf. Observed produce slicer stored as clean with food debris present on blades. CDI: Employee took slicer to 3-comp sink for W/R/S.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: Sanitizing Solutions - https://youtu.be/ykP2mr9CtRg , How to Test Sanitizer https://youtu.be/y0SjmnabFaY , and Cleaning and Sanitizing Food Contact Surfaces https://youtu.be/av1Rbh-lh08 .
4-703.11(B) After being cleaned in a mechanical dish machine, equipment food-contact surfaces and utensils shall be sanitized in the dish machine by achieving a utensil surface temperature of 160F as measured by a max/min thermometer.-P. Observed height temperature dish machine measuring 114F, according to EHS disc thermometer. EHS observed very little water in dish machine. CDI: PIC filled dish machine and temperature reached 163F on disc thermometer.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training video at the following weblink: Cleaning and Sanitizing Food Contact Surfaces https://youtu.be/av1Rbh-lh08 . |
|
33
|
0.50
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
No
|
No |
3-501.15 Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths and active stirring. Cold air must flow around product to remove the heat. -Pf Observed edamame salad mix cooling in deep metal pans with lids that were stacked in WIC. After 1 hour, salad mix had no change in temperature. CDI: PIC took edamame mix to RIF uncovered to continue cooling. EHS observed product reach 41F by end of inspection.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Cooling Food Safely https://youtu.be/P6x8b1ZVOxU . |
|
44
|
0.50
|
Utensils, equipment & linens: properly stored, dried & handled |
Yes |
No
|
No |
4-903.11 (B) After cleaning and sanitizing, clean equipment and utensils shall be stored in a self-draining position that allows air drying and covered or inverted. Observed multiple stacks of metal and plastic containers wet nested. CDI: PIC instructed employee to unstack them to allow for air drying. |
|
47
|
0
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
4-501.11 Maintain equipment in good repair. Observed two inner doors of 3-door RIF with metal panels missing and leaving insulation foam exposed. Repair or replace. |
|
55
|
0
|
Physical facilities installed, maintained & clean |
No |
No
|
No |
6-501.11 Floors, walls, and ceilings including the attachments such as soap and towel dispensers; light fixtures; and heat/ac vents shall be maintained in good repair. Observed multiple tiles near back door broken and missing. Repair. |
|