|
14
|
3
|
Food-contact surfaces: cleaned and sanitized |
Yes |
Yes
|
No |
4-601.11(A) Equipment food contact surfaces and utensils shall be clean to sight and touch. -Pf Black plastic tubs stored as clean with food debris on drying rack over sink. CDI - All sent to dish area for reprocessing. |
|
20
|
0
|
Proper cold holding temperatures |
Yes |
No
|
No |
3-501.16(A)(2) Maintain TCS foods in cold holding at 45F or less. -P Cooked broccoli holding at 68F on stand next to grill line. CDI - Relocated to cooler for rapid cool down. |
|
31
|
0.50
|
Proper cooling methods used; adequate equipment for temperature control |
No |
No
|
No |
3-501.15 Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths and active stirring. Cold air must flow around product to remove the heat. -Pf Rice cooling in plastic bag tied shut. CDI - Rice removed from bag and placed in shallow pan with lid off to finish cooling. |
|
41
|
0.50
|
In-use utensils: properly stored |
Yes |
Yes
|
No |
3-304.12 Store in-use utensils in a clean, dry place, in food with handles out, in 135F or greater water or in running water which quickly moves food particles to the drain. Tongs in low mien and scoop in raw chicken all stored with handles contacting food. CDI - Scoop and tongs removed from products. |
|
42
|
0
|
Utensils, equipment and linens: properly stored, dried and handled |
No |
No
|
No |
4-901.11(A) Air dry equipment and utensils after cleaning and sanitizing. Metal food pans and plastic pans wet stacked on drying rack. Separate to allow air drying. |
|
45
|
0
|
Equipment, food and non-food-contact surfaces approved; cleanable, properly designed, constructed and used |
No |
No
|
No |
4-502.11(A) Maintain utensils in good repair. Observed damaged metal strainer and frayed metal scrub pads at dish area and at cook line. CDI - All discarded. |
|
47
|
0
|
Non-food-contact surfaces clean |
No |
No
|
No |
4-601.11(C )/4-602.13 Keep the equipment clean to avoid build up of dust, food residue or debris. Bits of raw chicken left on back of slicer guard. CDI - Cleaned during the inspection. |