|
6
|
2
|
Hands clean and properly washed |
Yes |
No
|
No |
2-301.14 Wash hands after handling soiled equipment or utensils and before food preparation, handling clean equipment and utensils and unwrapped single-use/single-service articles. -P Observed employee washing dishes going between dirty and clean dishes without handwash between processes. CDI PIC instructed employee on proper handwashing procedure. |
|
8
|
1
|
Handwashing sinks, supplied and accessible |
Yes |
No
|
No |
6-301.11 Provide soap for handwashing at each handsink. -Pf Observed rear handwash without soap at time of inspection. CDI PIC instructed employee to change soap. |
|
18
|
1.50
|
Proper cooling time and temperatures |
Yes |
No
|
No |
3-501.14(A) Quickly cool cooked foods within 2 hours from 135F to 70F; and within a total of 6 hours from 135F to 45F. -P Observed hash cooling in prep unit in volume and covered at insufficient rate to meet cooling parameters. CDI cooling method changed. |
|
31
|
0.50
|
Proper cooling methods used; adequate equipment for temperature control |
No |
No
|
No |
3-501.15 Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths and active stirring. Cold air must flow around product to remove the heat. -Pf Observed hash cooling in prep unit tightly covered and in too great of volume to facillitate proper cooling . CDI employee moved hash to sheet pan and proper cooling was achieved. |
|
36
|
2
|
Insects and rodents not present; no unauthorized animals |
No |
Yes
|
No |
6-501.111 Keep the premises free of insects, rodents, and other pests. Observed gnats throughout the facility. |
|
45
|
0
|
Equipment, food and non-food-contact surfaces approved; cleanable, properly designed, constructed and used |
No |
No
|
No |
4-501.11 Maintain equipment in good repair. Observed gaskets on prep unit in need of replacement. -0 points- |