|
16
|
1.50
|
Food-contact surfaces: cleaned & sanitized |
Yes |
No
|
No |
4-601.11(A) Equipment food contact surfaces and utensils shall be clean to sight and touch. -Pf.
Observed residue on the non-food contact surfaces of metal insert container that were contaminating the food contact surfaces of other containers while being stacked together as clean. -CDI- Dishes were moved to the 3 compartment sink to be W/R/S. (1.5 pts)
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: Sanitizing Solutions - https://youtu.be/ykP2mr9CtRg , How to Test Sanitizer https://youtu.be/y0SjmnabFaY , and Cleaning and Sanitizing Food Contact Surfaces https://youtu.be/av1Rbh-lh08 . |
|
39
|
0
|
Contamination prevented during food preparation, storage & display |
Yes |
No
|
No |
3-307.11 Protect food from contamination sources not specifically noted by the code.
Observed drill being stored on prep table. No food was at immediate risk of contamination. -CDI- Drill was relocated and surface was sanitized. (0 pts) |
|
44
|
0
|
Utensils, equipment & linens: properly stored, dried & handled |
No |
No
|
No |
4-903.11 (B) After cleaning and sanitizing, clean equipment and utensils shall be stored in a self-draining position that allows air drying and covered or inverted.
Observed slight wet stacking with metal insert containers that were said to be clean. Separate to allow proper air drying. (0 pts) |
|
47
|
0
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
4-101.19/4-202.16 Non FOOD-CONTACT SURFACES of EQUIPMENT that are exposed to splash, spillage, or other FOOD soiling or that require frequent
cleaning shall be constructed of a CORROSION-RESISTANT, nonabsorbent, and SMOOTH material. NonFOOD-CONTACT SURFACES shall be free of unnecessary ledges, projections, and crevices, and designed and constructed to allow easy cleaning and to facilitate maintenance.
Observed cardboard being used as a means to store products on top of on surfaces like low shelves. Replace the cardboard with smooth, easily cleanable, and non-absorbent surface. (0 pts) |
|
49
|
0.50
|
Non-food contact surfaces clean |
No |
Yes
|
No |
4-601.11(C ) Keep non food contact surfaces of equipment clean to avoid build up of dust, food residue or debris.4-602.13 Non food contact surfaces of equipment shall be cleaned frequently to preclude accumulation of soil residues.
Observed wire shelving throughout facility soiled with debris/residue. Increase cleaning frequency. REPEAT*** (0.5 pts) |
|
55
|
0.50
|
Physical facilities installed, maintained & clean |
No |
No
|
No |
6-501.12 Floors, walls, ceilings including the attachments such as soap, towel dispensers; light fixtures; and heat/ac vent covers shall be clean. Caution should be used to minimize food exposure.
Observed heavy accumulation of food debris/residue on the floors next to the grill and fryer station. Increase cleaning frequency to help prevent the possibility of attracting pests. (0.5 pts) |