|
1
|
2
|
PIC present, Demonstration - Certification by accredited program, and performs duties |
No |
No
|
No |
2-101.11/2-102.11 Person In Charge (PIC) shall be present during all hours of operation; The PIC shall demonstrate knowledge of food safety by being a Certified Food Protection Manager. -PF
PIC was not a CFPM |
|
14
|
0
|
Food-contact surfaces: cleaned and sanitized |
Yes |
No
|
No |
4-601.11(A) Equipment food contact surfaces and utensils shall be clean to sight and touch. -Pf
Some plates and bowls soiled with food debris. CDI- Taken to dishwasher. |
|
20
|
1.50
|
Proper cold holding temperatures |
Yes |
No
|
No |
3-501.16(A)(2) Maintain TCS foods in cold holding at 45F or less. -P
Cheese and tomatos recorded greater than 45F (see chart). CDI- Taken to WIF for rapid cooling. |
|
31
|
0.50
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
No
|
No |
3-501.15 Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths, active stirring, or leave food uncovered to facilitate heat transfer. -Pf
Gyro meat cooling in large tub with lid on. CDI- Dumped onto sheet tray for proper cooling |
|
42
|
0
|
Utensils, equipment and linens: properly stored, dried and handled |
No |
No
|
No |
4-901.11(A) Air dry equipment and utensils after cleaning and sanitizing.
Wet stacking of plates/metal bins observed. |
|
45
|
0
|
Equipment, food and non-food-contact surfaces approved; cleanable, properly designed, constructed and used |
No |
No
|
No |
4-501.11 Maintain equipment in good repair.
Damaged gasket on door to WIC. |