|
16
|
1.50
|
Food-contact surfaces: cleaned & sanitized |
Yes |
No
|
No |
4-703.11(B) After being cleaned in a mechanical dish machine, equipment food-contact surfaces and utensils shall be sanitized in the dish machine by achieving a utensil surface temperature of 160F as measured by a max/min thermometer.-P. Dish machine only reached 155F on EHS thermometer. CDI - Establishment has agreed to manually wash dishes in 3-compartment sink until it is repaired. EHS will do a follow-up visit next week to ensure it is repaired.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training video at the following weblink: Cleaning and Sanitizing Food Contact Surfaces https://youtu.be/av1Rbh-lh08 . |
|
28
|
0
|
Toxic substances properly identified stored & used |
Yes |
No
|
No |
7-102.11 Label working containers of toxic materials such as cleaners and sanitizers.-Pf Spray bottle with unknown chemical at dish area. Label all spray bottles of chemicals. CDI - PIC emptied bottle. 0 pts. |
|
38
|
0
|
Insects & rodents not present; no unauthorized animals |
No |
No
|
No |
6-501.112 Remove dead or trapped birds, insects, rodents, and other pests. Sticky fly trap had large amount of small flies on it above dish machine. Discard trap. 0 pts. |
|
47
|
0
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
4-501.11 Maintain equipment in good repair. Replace torn gasket on upright cooler door. 0 pts. |
|
55
|
0.50
|
Physical facilities installed, maintained & clean |
No |
Yes
|
No |
6-501.12 Floors, walls, ceilings including the attachments such as soap, towel dispensers; light fixtures; and heat/ac vent covers shall be clean. Caution should be used to minimize food exposure. Clean walls in dish machine area. REPEAT |