|
|
| CDI=Corrected During Inspection | |
R=Repeat Violation | |
VR=Verification Required | |
|
|
| Violation Item
| Demerits
| Violation Description
| CDI | R | VR |
|
|
1
|
1
|
PIC Present, demonstrates knowledge, & performs duties |
Yes |
Yes
|
No |
2-102.11 (A), (B), and (C)(1), (4)-(16) Demonstration - Pf -- Observed priority (most critical violations) items during the inspection, the person-in-charge was not a food safety certified manager, and the person-in-charge did not have proper knowledge regarding public health practices of the facility. The person in charge shall demonstrate knowledge by either having passed an ANSI accredited program (e.g. ServSafe), having no violations of priority items during the inspection, or having proper knowledge regarding public health practices and principles applicable to the operation. The PIC was educated throughout the inspection addressing all cited critical violations observed during the inspection to correct the violation. REPEAT |
|
2
|
1
|
Certified Food Protection Manager |
No |
Yes
|
No |
2-102.12 (A) Certified Food Protection Manager - C -- Upon inspection, there was no certified food protection manager (CFPM) present. At least one employee who has supervisory and management responsibility and the authority to direct and control food preparation and service shall be a CFPM by taking and passing an ANSI accredited program (ServSafe for example). A CFPM shall be present during all operating hours. REPEAT |
|
16
|
0
|
Food-contact surfaces: cleaned & sanitized |
Yes |
Yes
|
No |
4-601.11 (A) Equipment, Food-Contact Surfaces, Nonfood-Contact Surfaces, and Utensils - Pf -- Observed food contact surfaces can opener blade, knife and utensil from drawer contaminated with food residue in clean storage. Equipment food contact surfaces and utensils shall be clean to sight and touch. The dishes were sent to the dish area to correct the violation. REPEAT 0 PTS |
|
23
|
1.50
|
Proper date marking & disposition |
Yes |
No
|
No |
3-501.17 Ready-To-Eat Time/Temperature Control for Safety Food, Date Marking - Pf -- Observed chicken pie and tomato pie base without a date mark. Ready to eat TCS foods prepared/opened and held for more than 24 hours shall be date marked to indicate when the food shall be consumed, sold, or discarded not to exceed 7 days. The day of preparation/opening shall count as day one. Since the date of preparation was known, the foods were date marked to correct the violation. |
|
48
|
0.50
|
Warewashing facilities: installed, maintained & used; test strips |
Yes |
No
|
No |
4-303.11 Cleaning Agents and Sanitizers, Availability - Pf -- At the time of inspection, no chlorine/quat sanitizer was prepared. Except for those that are generated on-site at the time of use, chemical sanitizers that are used to sanitize equipment and utensils shall be provided and available for use during all hours of operation. The person-in-charge made the sanitizer to correct the violation. |
|
49
|
1
|
Non-food contact surfaces clean |
No |
Yes
|
No |
4-601.11 Equipment, Food-Contact Surfaces, Nonfood Contact Surfaces, and Utensils; 4-602.13 Nonfood-Contact Surfaces - C -- Observed build-up of dust/debris on the tops, sides and legs of equipment. Grease and debris on the handles of equipment doors, build up on shevling inside reach ins and dunnage racks throughout. Clean the top of hot holding display cabinet where heavy dust is present as well as the display cases through out. Cleaning needed outside the warmer and in the tracks as well as black floor fan where dust is present and any splash on speed racks throughout. Nonfood-contact surfaces of equipment shall be kept free of an accumulation of dust, dirt, food residue, and other debris and be cleaned at a frequency necessary to preclude accumulation of soil residues. REPEAT |
|
55
|
1
|
Physical facilities installed, maintained & clean |
No |
Yes
|
No |
6-501.12 Cleaning, Frequency and Restrictions - C -- Floor cleaning needed in kitchen area, storage area and restroom paying special attention underneath shelving, corners and edges. Clean walls through out kitchen, dry storage areas and hallway where any splash is present. Clean any heavy touch areas light doors near knobs and light switches where build up is present. Physical facilities shall be cleaned as often as necessary to keep them clean. REPEAT |
|