|
14
|
1.50
|
Food-contact surfaces: cleaned and sanitized |
Yes |
No
|
No |
4-602.11 Clean the equipment and utensils used with TCS foods as required to avoid contamination. -P. Observed knives stored on utensil magnet with debris on the blades and the magnet. CDI- Knives were taken to the 3-comp sink to be washed, rinsed, and sanitized. Knife magnet was washed, rinsed, and sanitized as well. |
|
31
|
0.50
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
No
|
No |
3-501.15 Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths and active stirring. Cold air must flow around product to remove the heat. -Pf. Observed shredded chicken cooling at room temperature. CDI- pan of shredded chicken was placed in the walk-in cooler and allowed to further chill. |
|
43
|
0.50
|
Single-use and single-service articles; properly stored and used |
Yes |
Yes
|
No |
4-904.11 Display and handle single-use and single-service articles to prevent contamination. Observed stack of single-service trays that were not inverted. CDI- trays were inverted. REPEAT |
|
45
|
0
|
Equipment, food and non-food-contact surfaces approved; cleanable, properly designed, constructed and used |
No |
No
|
No |
4-501.11 Maintain equipment in good repair. Repair leaking faucet that 3-comp sink. |
|
53
|
0.50
|
Physical facilities installed, maintained and clean |
No |
No
|
No |
6-501.12 Floors, walls, ceilings including the attachments such as soap, towel dispensers; light fixtures; and heat/ac vent covers shall be clean. Caution should be used to minimize food exposure. Clean splash from walls at mop sink and behind prep stations in kitchen areas. Clean floor in corners and under equipment in kitchen area. |