|
20
|
1.50
|
Proper cooling time & temperatures |
Yes |
No
|
No |
3-501.14(A) Quickly cool cooked foods within 2 hours from 135F to 70F; and within a total of 6 hours from 135F to 41F. -P. - Observed rice cooled from prior day at 43 degrees F in prep refrigerator. CDI, rice voluntarily discarded.
For more information please visit: http://meck.co/FoodSafety or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Cooling Food Safely https://youtu.be/P6x8b1ZVOxU . |
|
33
|
0
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
No
|
No |
3-501.15 Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths and active stirring. Cold air must flow around product to remove the heat. -Pf - Observed rice cooling from prior day in deep covered container in flip top prep cooler. CDI, rice voluntarily discarded.
For more information, please visit: http://meck.co/FoodSafety or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Cooling Food Safely https://youtu.be/P6x8b1ZVOxU . |
|
37
|
1
|
Food properly labeled: original container |
No |
Yes
|
No |
3-302.12 Label all working containers of food (oils, spices, salts, flour, sugar) except food that is easy to identify such as dry pasta. Observed baking soda and flour not labeled in storage area in dry storage container. Improvement made since previous inspection. Points not escalated today. |
|
43
|
0.50
|
In-use utensils: properly stored |
No |
No
|
No |
3-304.12 (A) In-use utensils in TCS food, must be stored with handles above the food and top of the food container. Observed single-service bowls used as scoops.
3-304.12 (C ) Store in-use utensils on a clean portion of the food preparation table or cooking equipment. The utensils and storage surface must be cleaned and sanitized every 4 hours. Observed in-use knife wedged in soiled area. |
|
55
|
0.50
|
Physical facilities installed, maintained & clean |
No |
No
|
No |
6-101.11/6-201.11 Floors, walls and ceilings shall be designed, constructed, and installed so they are smooth and easily cleanable. Floors shall be non-absorbent in areas subject to moisture. Observed peeling baseboard stripping behind counter leading to kitchen and FRP wallboard removed from where plumber made repair in leak according to PIC. |