|
5
|
4
|
Water quality: daily written records of water quality and test kit kept on site |
No |
No
|
No |
Cyanuric acid at 100ppm. This is the maximum allowed. Pool using stabilized chlorine. Will need to reduce cyanuric acid levels in the pool to maintain below 100ppm. - Intent to suspend item. |
|
8
|
4
|
Pool maintenance: surface skimmers (with weirs, baskets and covers) or gutters clean, in good repair, and functioning properly, no floating debris |
No |
No
|
No |
One weir missing, another weir stuck. Install functional weirs. - Intent to suspend item.
Skimmer lids are the wrong type. One stuck and recessed, creating a trip hazard. Replace with the correct covers for the pool skimmers. - Intent to suspend item. |
|
12
|
4
|
Pool maintenance: inlets and other fittings in place and in good repair |
No |
No
|
No |
Missing one inlet fitting. Provide directional inlet fittings. |
|
15
|
6
|
Premises: body hook and ring buoy with throw rope or lifeguard with rescue tube provided and properly located |
No |
No
|
No |
Ring buoy damaged. Replace with US Coast Guard approved ring buoy attached to a 24 foot throw rope. - Corrected by operator. |
|
17
|
4
|
Premises: decks unobstructed, properly drained, free of trip hazards |
No |
No
|
No |
Gaps in deck drains creating a trip hazard. Ensure no gaps or opeings > 1/2" in deck. - Intent to suspend item. |
|
21
|
4
|
Premises: pool and deck lighting provided at pools that operate at night |
No |
No
|
No |
Underwater light off. Provide underwater lighting when spa is open. Corrected. |
|
25
|
2
|
Equipment room: equipment and chemicals kept in a dry, well-ventilated enclosure |
No |
No
|
No |
Fan in chemical storage room tied to the light switch. Ensure that fan runs continuously and is not tied to the light switch. |
|
27
|
2
|
Equipment room: filter backwash discharged through an air gap |
No |
No
|
No |
Provide air gap for backwash. |
|
29
|
2
|
Dressing and sanitary facilities: required fixtures provided, clean, and in good repair |
No |
No
|
No |
Hot water > 110F. Maintain at 110F or less. |