|
6
|
6
|
Submerged suction outlets meet ASME/ANSI A112.19.8-2007. Single drains protected. (.2537, .2539) GPM= ____Field verification complete=____ |
No |
No
|
No |
.2539(b) Pools with single main drain or drains <36" apart shall provide a safety vacuum release system (SVRS) or other methods of preventing bather entrapment. Per ANSI/ASME A112.19.17, these must be must be tested monthly per manufacture’s instructions and documented. - Corrected. Operator tested today. |
|
17
|
4
|
Premises: decks unobstructed, properly drained, free of trip hazards |
No |
No
|
No |
3 sides of pool lined with lounge chairs. Only 3 feet of deck clearance. .2522 (c) Provide at least 4 ft clear walking space around wading pool at all times. - Corrected. Lounge chairs removed. |
|
18
|
4
|
Premises: lifeguards present or warning signs posted |
No |
No
|
No |
Warning - No Lifeguard on Duty signage heavily faded. .2530(c) Provide "Warning - No Lifeguard on Duty" in 4" lettering. - Corrected. |
|
24
|
4
|
Equipment room: approved pump, filter, and flow meter operating properly |
No |
No
|
No |
Eyeball fitting installed on vacuum line. .2518(f) Provide a vacuum cap or self-closing cap for pools built after May 1, 2010. - Corrected. Eyeball fitting removed and self-closing vacuum cap installed. |
|
26
|
2
|
Equipment room: valves and pipes identified by color codes or labels |
No |
No
|
No |
Some piping not labeled. .2518(d) Piping and valves shall be labeled with color codes or labels. |
|
27
|
2
|
Equipment room: filter backwash discharged through an air gap |
No |
No
|
No |
No air gap for backwash line. .2513(b) Filter backwash shall be discharged through an air gap. |