|
8
|
4
|
Pool maintenance: surface skimmers (with weirs, baskets and covers) or gutters clean, in good repair, and functioning properly, no floating debris |
No |
No
|
No |
.2518(k) Install skimmer per manufacturer specifications and eliminate equalizer line plugs or plug per State requirements.
Observed 2 of 5 equalizer lines with plug inserted backwards. Re-install equalizer plugs properly at earliest opportunity. Ensure lines are cleared of water before plugging to prevent damage. |
|
12
|
4
|
Pool maintenance: inlets and other fittings in place and in good repair |
No |
No
|
No |
.2537(8) Fittings and/or face plates shall be replaced when damaged and kept in good repair.
Observed damaged interior pool lighting coming away from side wall nearest to pump room.
Corrected- CPO screws light fixture to pool wall properly. |
|
24
|
4
|
Equipment room: approved pump, filter, and flow meter operating properly |
No |
No
|
No |
.2518(g) Keep flow meter operational.
Observed flow meter buoy at 1.5” line required cap loosening/re-tightening to become responsive and register flow. Field verification was successful but CPO is advised to replace the flow meter so it remains in good repair within 2 weeks. CPO to follow up after Memorial Day. |
|
29
|
2
|
Dressing and sanitary facilities: required fixtures provided, clean, and in good repair |
No |
No
|
No |
.2526(j) Provide soap and soap dispenser, no glass, at each sink.
Observed glass casing around light bulbs above restroom hand sinks. Remove or replace with shatterproof bulb casing. |