| Violation Item
| Demerits
| Violation Description
| CDI | R | VR |
|
|
7
|
4
|
Pool maintenance: pool walls and floor kept clean, free of debris and in good repair |
No |
No
|
No |
Some minor chipping of paint on the pool floor. Does not present hazard at time of inspection. |
|
8
|
4
|
Pool maintenance: surface skimmers (with weirs, baskets and covers) or gutters clean, in good repair, and functioning properly, no floating debris |
No |
No
|
No |
One weir missing from skimmer closest to building. Replace weir. Permit denial. |
|
16
|
4
|
Premises: fence or barrier with self-closing, self-latching gates properly constructed and maintained |
No |
No
|
No |
.2537(b) All gates and doors shall be self-closing, self-latching. Observed pool gate not self-closing/self-latching.
Front gate not 48" in height on right side of gate. Gate shall be 48" in height. Permit denial.
Front gate with horizontals <45" apart. Spoke with CPO about installing plexiglass from bottom horizontal to top to eliminate horizontals and maintain 45" or greater. Permit denial. |
|
17
|
4
|
Premises: decks unobstructed, properly drained, free of trip hazards |
No |
No
|
No |
Pool furniture <6 ft. from pool edge. Maintain 6 ft. clearance around the pool in all locations. |
|
23
|
4
|
Equipment room: chlorine or bromine automatic feeders that meet NSF Standard 50 |
No |
No
|
No |
300-29x chlorinator installed without flow meter. For NSF approval, install flow meter on inlet line to chlorinator. Original construction. If ever replaced, ensure repaired per NSF standard. |
|
24
|
4
|
Equipment room: approved pump, filter, and flow meter operating properly |
No |
No
|
No |
Leak at the pump. Repair leak. Permit denial. |
|
25
|
2
|
Equipment room: equipment and chemicals kept in a dry, well-ventilated enclosure |
No |
No
|
No |
Pump room floor wet due to leak at pump. Keep dry. |
|
26
|
2
|
Equipment room: valves and pipes identified by color codes or labels |
No |
No
|
No |
Labeling wearing off of pipes in pump room. Clearly identify all pipes with color codes or labels. |
|
29
|
2
|
Dressing and sanitary facilities: required fixtures provided, clean, and in good repair |
No |
No
|
No |
Hot water in restrooms >120 F. Maintain at 110 F or below. |
|
33
|
2
|
Dressing and sanitary facilities: hose bibbs and floor drains provided |
No |
No
|
No |
No hose bib in restrooms. Original construction. Provide hose bib with backflow prevention device. |