|
38
|
0
|
Insects & rodents not present; no unauthorized animals |
No |
No
|
No |
6-501.111 Keep the premises free of insects, rodents, and other pests. Observed birds present in the store. Birds were not present in the cutting area, however facility must ensure that birds are removed from premises. |
|
39
|
1
|
Contamination prevented during food preparation, storage & display |
Yes |
No
|
No |
3-305.11 Store food in a clean, dry location, not exposed to contamination. Keep at least 6 inches above the floor. Observed large cuts of pork stored on the floor in the WIF. Food was wrapped and packaged. Ensure that all foods are kept at least 6 inches off of the floor. -CDI- PIC lifted food to be at least 6 inches off of the floor. |
|
45
|
0
|
Single-use & single-service articles: properly stored & used |
No |
No
|
No |
4-903.11(A)(C) Store single-use and single-service articles in a clean, dry location; where they are not exposed to splash, dust, or other contamination; and at least 6 inches above the floor.
Observed single service styrofoam trays with presence of splatter. Ensure that styrofoam trays are stored in a manner that prevent splatter or buildup. |
|
47
|
1
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
Yes
|
No |
4-101.19/4-202.16 Non FOOD-CONTACT SURFACES of EQUIPMENT that are exposed to splash, spillage, or other FOOD soiling or that require frequent cleaning shall be constructed of a CORROSION-RESISTANT, nonabsorbent, and SMOOTH material. NonFOOD-CONTACT SURFACES shall be free of unnecessary ledges, projections, and crevices, and designed and constructed to allow easy cleaning and to facilitate maintenance.
Observed rusting on shelving, doorways, and external portion of equipment throughout the cutting room. Ensure that shelving, doorways, and equipment is free of rust and corrosion. |
|
55
|
1
|
Physical facilities installed, maintained & clean |
No |
Yes
|
No |
6-101.11/6-201.11 Floors, walls and ceilings shall be designed, constructed, and installed so they are smooth and easily cleanable. Floors shall be non-absorbent in areas subject to moisture. Observed chipped and cracked floors throughout the WIC and cutting area of the facility. |