|
14
|
1.50
|
Food-contact surfaces: cleaned and sanitized |
Yes |
No
|
No |
4-602.11 Clean the equipment and utensils used with nonTCS foods as required to avoid contamination. Observed dried meat debris on slicer of saw wheel in market area. CDI- slicer was taken apart and properly cleaned. |
|
31
|
1
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
Yes
|
No |
3-501.15 Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths and active stirring. Cold air must flow around product to remove the heat. -Pf. Observed ground beef wrapped tightly and cooling in display case cooler. CDI- Items were unwrapped and placed in walk-in cooler to properly chill. REPEAT. |
|
42
|
0
|
Utensils, equipment and linens: properly stored, dried and handled |
Yes |
No
|
No |
4-901.11(A) Air dry equipment and utensils after cleaning and sanitizing. Observed stack of totes stacked wet. CDI- containers were separated and allowed to air day. |
|
47
|
0.50
|
Non-food-contact surfaces clean |
No |
No
|
No |
4-601.11(C )/4-602.13 Keep the equipment clean to avoid build up of dust, food residue or debris. Clean dust from a/c vents in market area. Clean shelving in walk-in cooler near back door. |
|
53
|
1
|
Physical facilities installed, maintained and clean |
No |
Yes
|
No |
6-501.11 Floors, walls, and ceilings including the attachments such as soap and towel dispensers; light fixtures; and heat/ac vents shall be maintained in good repair. Repaint areas of walls in walk-in cooler and market area. Repair damaged areas of floor boards in market areas. REPEAT |