|
|
| CDI=Corrected During Inspection | |
R=Repeat Violation | |
VR=Verification Required | |
|
|
| Violation Item
| Demerits
| Violation Description
| CDI | R | VR |
|
|---|
|
8
|
0
|
Hands clean & properly washed |
Yes |
No
|
No |
2-301.12 (A),(B) Wash hands for at least 20 seconds. Follow the cleaning procedure to adequately wash your hands. Use warm water, soap, scrub 10 to 15 seconds, rinse, and immediately follow the cleaning procedure with thorough hand drying method (ex. Disposable Paper Towel). -P
- Observed employee washed hand and then turn the faucet knob off with bare hand. Hand washing sign posted at hand sinks. CDI- proper hand washing discussed with employees and PIC, correct hand washing was demonstrated by another employee during the inspection. Ensure to always follow correct hand washing at all time.
For more information on handwashing, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training video at the following web link, https://youtu.be/BH6CLGrH10M . |
|
16
|
1.50
|
Food-contact surfaces: cleaned & sanitized |
No |
No
|
Yes |
4-703.11(B) After being cleaned in a mechanical dish machine, equipment food-contact surfaces and utensils shall be sanitized in the dish machine by achieving a utensil surface temperature of 160F as measured by a max/min thermometer.-P. - Observed dishwasher run through several times and not reaching the temperature of 160F. The dishwasher shall be fixed and work properly. At the meantime, all dishes shall be sanitized at 3 compartment sinks until the machine is fixed. VERIFICATION NEEDED -1.5 pts-
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training video at the following weblink: Cleaning and Sanitizing Food Contact Surfaces https://youtu.be/av1Rbh-lh08 . |
|
33
|
1
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
Yes
|
No |
REPEAT
3-501.15 Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths and active stirring. Cold air must flow around product to remove the heat. -Pf For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Cooling Food Safely https://youtu.be/P6x8b1ZVOxU. Observed egg salad/tuna salad, ham and cheese sandwiches, all wrapped in plastic bag folded, placed in a deep bus-tub container, put in double door refrigerator to cool. The cooling rate is very slow and/or not moving at all within a hour. CDI- PIC and EHS discussed different cooling methods, experience way to cool and also put in WIF to quickly cool during inspection. Items cooling down quicker in WIC/WIF rather than refrigerator. Ensure to use proper cooling methods at anytime -1 pts- |
|
38
|
0
|
Insects & rodents not present; no unauthorized animals |
No |
No
|
No |
6-501.111 Keep the premises free of insects, rodents, and other pests.- Observed drain flies in the kitchen. Keep free of flies at anytime. -0 pts- |
|
47
|
0
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
4-502.11(A) Maintain utensils in good repair.- Observed damaged around corners of food trays on speed rack. Ensure to keep all food equipment and utensils in good repair. -0 pts- |
|
55
|
0
|
Physical facilities installed, maintained & clean |
No |
No
|
No |
6-501.11 Floors, walls, and ceilings including the attachments such as soap and towel dispensers; light fixtures; and heat/ac vents shall be maintained in good repair.- Observed damaged wall back of kitchen office leading to dishwasher area, repair needed. -0 pts- |
|