|
22
|
1.50
|
Proper cold holding temperatures |
Yes |
No
|
No |
3-501.16(A)(2) Maintain TCS foods in cold holding at 41F or less. -P. Observed several TCS food items cold holding above 41F in walk in cooler, refer to temperature log. Per PIC door had been opened and closed a lot during lunch service. CDI, door remained closed, TCS foods were at 41F or cooling to 41F by end of inspection.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Safe Food Temperatures https://youtu.be/tXP09IK-1TQ . |
|
33
|
0
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
No
|
No |
3-501.15 Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths and active stirring. Cold air must flow around product to remove the heat. -Pf. Observed oatmeal cooling covered in walk in cooler. CDI, EHS educated PIC on proper cooling methods and plastic was vented to allot proper airflow.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Cooling Food Safely https://youtu.be/P6x8b1ZVOxU . |
|
35
|
0.50
|
Approved thawing methods used |
Yes |
No
|
No |
3-501.13 (B)(1) Use approved thawing methods, at a water temperature of 70F or below, PF. Observed pot roast thawing under running water with water temperature at 80F. CDI, EHS educated PIC on noted rule and water adjusted to under 70F for the continuation of thawing process. |
|
55
|
0.50
|
Physical facilities installed, maintained & clean |
No |
No
|
No |
6-501.12 Floors, walls, ceilings including the attachments such as soap, towel dispensers; light fixtures; and heat/ac vent covers shall be clean. Caution should be used to minimize food exposure. Observed dust accumulation to ceiling vent covers throughout kitchen. Observed general cleaning needed to flooring under and behind equipment throughout kitchen. |