|
16
|
1.50
|
Food-contact surfaces: cleaned & sanitized |
Yes |
No
|
No |
4-501.114 Maintain sanitizer at correct concentrations when being used to sanitize. -P Observed quat sanitizer at greater than 400 ppm in spray bottles. Concentration must be 200-400ppm. CDI by re-mixing sanitizer solution in bottles so that it is between 200-400 ppm.
For more information please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: Sanitizing Solutions - https://youtu.be/ykP2mr9CtRg and How to Test Sanitizer https://youtu.be/y0SjmnabFaY |
|
48
|
0.50
|
Warewashing facilities: installed, maintained & used; test strips |
No |
No
|
No |
4-501.19 During manual warewashing, maintain the wash solution at a minimum of 110F or as otherwise allowed by the detergent manufacturer label. -Pf. Observed hot water in sink at 103F. Discussed hot water requirement with employee for re-filling sink, and advised that this must be at least 110F. CDI by instruction. |