|
|
| CDI=Corrected During Inspection | |
R=Repeat Violation | |
VR=Verification Required | |
|
|
| Violation Item
| Demerits
| Violation Description
| CDI | R | VR |
|
|
6
|
0
|
Proper eating, tasting, drinking or tobacco use |
Yes |
No
|
No |
2-401.11 (A) Employees shall eat, drink, or use any form of tobacco only in designated areas where the contamination of exposed food, clean equipment and utensils, and other items needing protection can not result.
2-401.11 (B) Closed beverage containers may be used if the container is handled to prevent contamination of the employee's hands, the container, and exposed food; clean equipment, utensils and linens; and unwrapped single-service and single-use articles. Observed employee water bottle stored with clean dishes on clean dish shelving. CDI- drinks moved, EHS discussed protocol/storage of employee drinks with PIC. |
|
13
|
0
|
Food in good condition, safe & unadulterated |
Yes |
No
|
No |
3-101.11 Food shall be safe for consumption, unadulterated and honestly presented. -P Observed tomatoes in walk in cooler that were rotted/molding. CDI- tomatoes discarded during inspection. |
|
16
|
1.50
|
Food-contact surfaces: cleaned & sanitized |
Yes |
No
|
No |
4-703.11(B) After being cleaned in a mechanical dish machine, equipment food-contact surfaces and utensils shall be sanitized in the dish machine by achieving a utensil surface temperature of 160F as measured by a max/min thermometer.-P. Observed high temp dish machine ranging in temperature from 154F to 158.5F, EHS ran plate thermometer through dish machine 8-10 times, did not reach proper sanitization temp of 160F. CDI- PIC placed work order, stated that someone is arriving this afternoon to service machine. Will not use dish machine for sanitization of dishes until fixed, will utilize 3 compartment sink. EHS will conduct compliance visit to ensure machine is fixed and properly sanitizing.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training video at the following weblink: Cleaning and Sanitizing Food Contact Surfaces https://youtu.be/av1Rbh-lh08 . |
|
38
|
0
|
Insects & rodents not present; no unauthorized animals |
No |
No
|
No |
6-501.112 Remove dead or trapped birds, insects, rodents, and other pests. Observed several areas with dead pests under dish machine area. EHS discussed pest control service with PIC, suggested to remove dead pests from traps more frequently. |
|
45
|
0
|
Single-use & single-service articles: properly stored & used |
No |
No
|
No |
4-903.11(A)(C) Store single-use and single-service articles in a clean, dry location; where they are not exposed to splash, dust, or other contamination; and at least 6 inches above the floor. Observed disposable lunch trays stored in boxes on floor behind service line. |
|
48
|
0.50
|
Warewashing facilities: installed, maintained & used; test strips |
No |
No
|
No |
4-302.13 (B) Provide an approved Max/Min thermometer for testing sanitizing temperatures in hot water warewashing machines. The thermometer must be readily accessible. -Pf Observed max/min thermometer for high temp dish machine not accurately reading temperatures when compared to inspectors plate thermometer. EHS found that facility thermometer was reading 169F after run, inspectors thermometer reading around 155-158F. EHS found that facilities thermometer was inconsistent, sometimes reading 169F, sometimes reading 96F, not properly calibrated/functional. VR by 10/20 to ensure facility has a functioning thermometer for checking dish machine sanitization temps. |
|
49
|
0
|
Non-food contact surfaces clean |
No |
No
|
No |
4-601.11(C ) Keep non food contact surfaces of equipment clean to avoid build up of dust, food residue or debris.4-602.13 Non food contact surfaces of equipment shall be cleaned frequently to preclude accumulation of soil residues. Observed minor cleaning needed on vent grates in walk in cooler. |
|