|
10
|
1
|
Handwashing sinks supplied & accessible |
Yes |
No
|
No |
6-301.12 Provide paper towels or approved alternative for hand drying at each handsink. -Pf Observed handsink in corner of kitchen near walk in cooler/blast chiller with paper towels unable to dispense from dispenser, appeared to be jammed. CDI- paper towels provided. |
|
16
|
1.50
|
Food-contact surfaces: cleaned & sanitized |
Yes |
No
|
No |
4-601.11(A) Equipment food contact surfaces and utensils shall be clean to sight and touch. -Pf. For more information please visit: http://meck.co/FoodSafety or view our training videos at the following weblinks: Sanitizing Solutions - https://youtu.be/ykP2mr9CtRg , How to Test Sanitizer https://youtu.be/y0SjmnabFaY , and Cleaning and Sanitizing Food Contact Surfaces https://youtu.be/av1Rbh-lh08 . Observed can opener spike with black buildup, in need of cleaning. EHS discussed cleaning frequency of multiuse utensils with PIC. CDI- can opener scrubbed and run through dish machine for cleaning. |
|
28
|
0
|
Toxic substances properly identified stored & used |
Yes |
No
|
No |
7-102.11 Label working containers of toxic materials such as cleaners and sanitizers.-Pf Observed 1x chemical bottle with a fading label, no longer legible. CDI- bottle marked during inspection. |
|
39
|
0
|
Contamination prevented during food preparation, storage & display |
No |
No
|
No |
3-305.11 Store food in a clean, dry location, not exposed to contamination. Keep at least 6 inches above the floor. Observed oil and water squeeze bottles stored directly next to handsink at express service station. Handsink does not have splash guards, potential for splash contamination when using handsink with current storage. |
|
47
|
0
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
4-501.11 Maintain equipment in good repair. Observed shelving in walk in cooler that is damaged, chipping paint and rusting in areas.
4-501.12 Resurface or replace cutting surfaces that can no longer be effectively cleaned and sanitized. Observed a few cutting boards during inspection in need of resurfacing/replacing. EHS showed PIC cutting boards of concern. |