|
|
| CDI=Corrected During Inspection | |
R=Repeat Violation | |
VR=Verification Required | |
|
|
| Violation Item
| Demerits
| Violation Description
| CDI | R | VR |
|
|---|
|
15
|
3
|
Food separated & protected |
Yes |
Yes
|
No |
3-304.15(A) Discard gloves after a task is complete or any time they are damaged or soiled. -P. Observed food employees fail to discard gloves during food prep on cookline. Food employees were observed wiping soiled gloves on cloths before returning to use hands as utensils. CDI- EHS discussed with PIC, PIC had employees discard gloves, wash hands, and remove cloths. *REPEAT* |
|
16
|
0
|
Food-contact surfaces: cleaned & sanitized |
Yes |
No
|
No |
4-601.11(A) Equipment food contact surfaces and utensils shall be clean to sight and touch. -Pf.
Deli slicer needing cleaning in hard to reach and hard to see areas contacting food. CDI- PIC had employee remove slicer to w/r/s.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: Sanitizing Solutions - https://youtu.be/ykP2mr9CtRg , How to Test Sanitizer https://youtu.be/y0SjmnabFaY , and Cleaning and Sanitizing Food Contact Surfaces https://youtu.be/av1Rbh-lh08 . |
|
23
|
3
|
Proper date marking & disposition |
Yes |
Yes
|
No |
3-501.17 (A) or (B) Date mark/label all TCS foods that are ready-to-eat once opened or prepared and are to be held for more than 24 hours. -Pf. Establish a date marking system consistent with 3-501.17 (A) or (B). Additional date marking system options are found in 3-501.17 (D). SEE COMMENT BELOW.
For more information, please visit: www.mecknc.gov/foodsafety or view our training videos at the following weblinks: What are TCS Foods https://www.youtube.com/watch?v=q0iLZb7v0UM and Date Marking Food Safely https://youtu.be/BOPsSNUajYs .
3-501.18 Discard the food requiring date labels once time/temperature window has expired, if it has not been labeled, or if the label is incorrect. -P The PIC should train and assign staff to monitor date marking to prevent the use of food products that are no longer in compliance with 3-501.17 (A), (B), or (C). Observed TCS foods prepped on Friday 9/4 being replaced in containers with 9/8 date. CDI- PIC discussed with food employees, had correct date labeling marked on appropriate containers. Ensure dates are marked based on day of original prep, removal from packaging, or based on earliest ingredient. *REPEAT*
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Date Marking Food Safely https://youtu.be/BOPsSNUajYs . |
|
33
|
0
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
No
|
No |
3-501.15 Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths and active stirring. Cold air must flow around product to remove the heat. -Pf. Observed TCS being cooled in defrosting units, with tight lidding, and in densely packed containers. CDI- after discussion, PIC removed items to rapidly cool in walk-in without lidding.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Cooling Food Safely https://youtu.be/P6x8b1ZVOxU . |
|
41
|
0
|
Wiping cloths: properly used & stored |
Yes |
No
|
No |
3-304.14(D) Maintain dry wiping cloths free of visible debris and soil. Maintain sanitizer containers for in-use cloths free of visible debris and soil.
CDI- PIC removed unclean dry cloths from prep table and from food employees. |
|
47
|
0
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
4-101.19/4-202.16 Non FOOD-CONTACT SURFACES of EQUIPMENT that are exposed to splash, spillage, or other FOOD soiling or that require frequent
cleaning shall be constructed of a CORROSION-RESISTANT, nonabsorbent, and SMOOTH material. NonFOOD-CONTACT SURFACES shall be free of unnecessary ledges, projections, and crevices, and designed and constructed to allow easy cleaning and to facilitate maintenance.
Observed rusted shelving throughout establishment. |
|
49
|
0.50
|
Non-food contact surfaces clean |
No |
Yes
|
No |
4-601.11(C ) Keep non food contact surfaces of equipment clean to avoid build up of dust, food residue or debris.4-602.13 Non food contact surfaces of equipment shall be cleaned frequently to preclude accumulation of soil residues.
Observed outside of metal pans held on dish rack needing cleaning around rim, handles of prep drawers, fan blowing over prep areas, floor of walk-in freezer, all needing cleaning. *REPEAT* |
|
54
|
0
|
Garbage & refuse properly disposed; facilities maintained |
No |
No
|
No |
5-501.111 Keep storage areas and bins for waste in good repair.
Dumpster bin with rusted holes along bottom area. |
|