|
23
|
0
|
Proper date marking & disposition |
Yes |
No
|
No |
3-501.18 Discard the food requiring date labels once time/temperature window has expired, if it has not been labeled, or if the label is incorrect. -P The PIC should train and assign staff to monitor date marking to prevent the use of food products that are no longer in compliance with 3-501.17 (A), (B), or (C). Observed pork ribs originally prepped on 1/21 in WIC. CDI- PIC voluntarily discarded item.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Date Marking Food Safely https://youtu.be/BOPsSNUajYs |
|
28
|
1
|
Toxic substances properly identified stored & used |
Yes |
Yes
|
No |
7-201.11 Store toxic materials to avoid contamination of food, equipment, utensils, linens, and single-service/use items. -P. Observed chemical spray bottle being stored on prep table with food ingredients. Spray bottle with chemicals stored on rack holding Ready-to-eat foods. CDI- PIC removed bottles to designated areas. *REPEAT*. |
|
33
|
0
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
No
|
No |
3-501.15 Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths and active stirring. Cold air must flow around product to remove the heat. -Pf. Observed large deep plastic containers with tight fitting lids being used to cool TCS foods prepped earlier today. CDI- EHS discussed effective cooling methods with PIC, PIC had items removed to ice bath to increase cooling.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Cooling Food Safely https://youtu.be/P6x8b1ZVOxU . |
|
47
|
1
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
Yes
|
No |
4-101.19/4-202.16 Non FOOD-CONTACT SURFACES of EQUIPMENT that are exposed to splash, spillage, or other FOOD soiling or that require frequent
cleaning shall be constructed of a CORROSION-RESISTANT, nonabsorbent, and SMOOTH material. NonFOOD-CONTACT SURFACES shall be free of unnecessary ledges, projections, and crevices, and designed and constructed to allow easy cleaning and to facilitate maintenance. Observed rusted shelving throughout facility. Cardboard being used on shelving is being discarded weekly, per the PIC. Increase cleaning frequency and ensure parts of equipment exposed to splash, spillage, or other spoilage is corrosion-resistant, easily cleanable, and smooth. *REPEAT* |