|
33
|
1
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
Yes
|
No |
3-501.15 Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths and active stirring. Cold air must flow around product to remove the heat. - Pf - REPEAT - Observed raw ground beef burgers and raw salmon holding above 41F while cooling in display cooler and grab-n-go unit, respectively. Do not place items in units for service until cooled to 41F or below. Utilize walk-in cooler for cooling. - CDI - Employee moved items to WIC to quickly cool.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Cooling Food Safely https://youtu.be/P6x8b1ZVOxU . |
|
49
|
0
|
Non-food contact surfaces clean |
No |
No
|
No |
4-601.11(C ) Keep non food contact surfaces of equipment clean to avoid build up of dust, food residue or debris.4-602.13 Non food contact surfaces of equipment shall be cleaned frequently to preclude accumulation of soil residues. - Observed food residue and debris buildup on exterior of sliding doors and their tracks for display cases. Also observed water inside a few of the glass sliding door panels on the display cases. Remove water or replace panels to prevent mold growth. Clean and increase cleaning frequency to maintain doors and tracks clean. |