|
3
|
1
|
Management, food & conditional employee; knowledge, responsibilities & reporting |
Yes |
No
|
No |
2-102.11 (C ) (2), (3), (17) The Person in charge shall demonstrate knowledge of foodborne disease prevention, application of HACCP principles, and the requirements of this code by (A) Complying with the Food Code by having no violations of Priority Items during the current inspection, (B) Being a certified food protection manager, or (C) by responding correctly to the inspector's questions related to employee health process and procedures. -Pf
Employees were unable to locate Health Policy during inspection. CDI - EHS provided health policies during inspection. |
|
16
|
1.50
|
Food-contact surfaces: cleaned & sanitized |
Yes |
No
|
No |
4-501.114 Maintain sanitizer at correct concentrations when being used to sanitize. -P
4-602.11 (A) (4) Food contact surface of a thermometer shall be cleaned, and sanitized per 4-702.11/4-703.11, before using or storing. P.
Observed 0-50ppm Quat sanitizer at the 3-compartment sink due to the tube being blocked by air. CDI - Sanitizer was allowed to run until it came to the appropriate concentration. Observed a stored food thermometer with food debris still attached. CDI - Thermometer was cleaning with a probe wipe. |
|
21
|
0
|
Proper hot holding temperatures |
Yes |
No
|
No |
3-501.16(A)(1) Maintain TCS foods in hot holding at 135F or above. -P
Observed 126 degree hot dogs in the hot case. CDI - Items will be discarded within 4 hours, following the Time for Quality procedures. |
|
47
|
0.50
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
Yes
|
No |
REPEAT
4-501.11 Maintain equipment in good repair.
Observed a gasket tearing from WIF door. |