|
6
|
0
|
Proper eating, tasting, drinking or tobacco use |
No |
No
|
No |
2-401.11 (A) Employees shall eat, drink, or use any form of tobacco only in designated areas where the contamination of exposed food, clean equipment and utensils, and other items needing protection can not result. Observed food employee eating sliced deli meat on the cookline. EHS provided education and advised that facility designate an area for employees to eat. -0- |
|
16
|
3
|
Food-contact surfaces: cleaned & sanitized |
Yes |
Yes
|
No |
4-601.11(A) Equipment food contact surfaces and utensils shall be clean to sight and touch. -Pf. Observed a large amount of sheet pans and a few muffin tins stored as clean with visible food debris present. CDI- Items were taken to be w/r/s. **REPEAT** -3-
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: Sanitizing Solutions - https://youtu.be/ykP2mr9CtRg , How to Test Sanitizer https://youtu.be/y0SjmnabFaY , and Cleaning and Sanitizing Food Contact Surfaces https://youtu.be/av1Rbh-lh08 . |
|
38
|
0
|
Insects & rodents not present; no unauthorized animals |
No |
No
|
No |
6-501.111 Keep the premises free of insects, rodents, and other pests. Observed several gnats throughout the facility during the inspection. -0- |
|
44
|
1
|
Utensils, equipment & linens: properly stored, dried & handled |
No |
Yes
|
No |
4-903.11(B)(1) Clean equipment and utensils shall be stored in a self-draining position that allows for air drying. Observed muffin pans and metal bowls stored in clean dish storage that were stacked wet. **REPEAT** -1- |
|
47
|
0
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
4-101.19/4-202.16 Non FOOD-CONTACT SURFACES of EQUIPMENT that are exposed to splash, spillage, or other FOOD soiling or that require frequent
cleaning shall be constructed of a CORROSION-RESISTANT, nonabsorbent, and SMOOTH material. NonFOOD-CONTACT SURFACES shall be free of unnecessary ledges, projections, and crevices, and designed and constructed to allow easy cleaning and to facilitate maintenance. Observed shelving in dry storage areas beginning to rust. -0- |