|
|
| CDI=Corrected During Inspection | |
R=Repeat Violation | |
VR=Verification Required | |
|
|
| Violation Item
| Demerits
| Violation Description
| CDI | R | VR |
|
|---|
|
14
|
1.50
|
Food-contact surfaces: cleaned and sanitized |
No |
No
|
No |
4-601.11(A) Equipment food contact surfaces and utensils shall be clean to sight and touch. -Pf Sauce buckets for wings were soiled with food derbis. Be sure that buckets are thoroughly and completley washed before stacking for in-use. |
|
31
|
0
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
No
|
No |
3-501.15 Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths, active stirring, or leave food uncovered to facilitate heat transfer. -Pf Cooked chicken was cooling on a sheet tray in back of WIC but was wrapped in silan wrap. CDI- Product unwrapped. Do not wrap products when cooling. |
|
35
|
0
|
Food properly labeled: original container |
No |
No
|
No |
3-302.12 Label all working containers of food (oils, spices, salts) except food that is easy to identify such as dry pasta. Some bottles of sauces as well as a water bottle was unlanbeled. |
|
41
|
0.50
|
In-use utensils: properly stored |
No |
No
|
No |
3-304.12 During pauses in food preparation or dispensing, store in-use utensils in a clean, dry place, in food with handles above the food, in 135F or greater water, or in running water that moves food particles to the drain. Handle for scooping raw chicken was touching the raw chicken. |
|
45
|
2
|
Equipment, food and non-food-contact surfaces approved; cleanable, properly designed, constructed and used |
Yes |
Yes
|
No |
4-501.12 Resurface or replace cutting surfaces that can no longer be effectively cleaned and sanitized. Cutting boards on prep table scarred and in need of replacing. Replace/repair any cutting boards that appear scarred. REPEAT |
|
47
|
0
|
Non-food-contact surfaces clean |
No |
No
|
No |
4-601.11(C )/4-602.13 Non Food-contact surfaces of equipment shall be kept free of an accumulation of dust, dirt, food residue, and other debris. Non food contact surfaces of equipment shall be cleaned at a frequency necessary to preclude accumulation of soil or residue. Several NFCSA areas in need of cleaning (exterior of equipment, crevices of gaskets, etc) |
|