|
8
|
0
|
Handwashing sinks, supplied and accessible |
Yes |
No
|
No |
6-301.12 Provide paper towels or approved alternative for hand drying at each handsink. -Pf Observed no paper towels at hand wash sink. CDI, paper towels provided by PIC. |
|
14
|
1.50
|
Food-contact surfaces: cleaned and sanitized |
Yes |
Yes
|
No |
4-601.11(A) Equipment food contact surfaces and utensils shall be clean to sight and touch. -Pf Observed soiled lettuce and tomato slicer. CDI, items removed for W/R/S. |
|
18
|
0
|
Proper cooling time and temperatures |
Yes |
No
|
No |
3-501.14(A) Quickly cool cooked foods within 2 hours from 135F to 70F; and within a total of 6 hours from 135F to 41F. -P Observed no change in temperature of lettuce. CDI, food placed in smaller containers to cool. |
|
19
|
0
|
Proper hot holding temperatures |
Yes |
No
|
No |
3-501.16(A)(1) Maintain TCS foods in hot holding at 135F or above. -P Observed hash browns hot holding below 135F. CDI, food reheated to 165F. |
|
20
|
0
|
Proper cold holding temperatures |
Yes |
No
|
No |
3-501.16(A)(2) Maintain TCS foods in cold holding at 41F or less. -P Observed salads cold holding above 41F. PIC states salad was prepared that morning. CDI, item placed in walk in to cool. Salad reached 41F by end of inspection. |
|
31
|
1
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
Yes
|
No |
3-501.15 Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths and active stirring. Cold air must flow around product to remove the heat. -Pf Observed lettuce cooling in deep covered container. CDI, portions reduced and uncovered in walk in cooler. |
|
42
|
0
|
Utensils, equipment and linens: properly stored, dried and handled |
No |
No
|
No |
4-903.11 Store cleaned equipment, utensils, linens and packages in a clean, dry location and at least 6 inches off the floor. Observed lettuce and tomato slicer stored on floor. |
|
49
|
1
|
Plumbing installed; proper backflow devices |
No |
No
|
Yes |
5-203.14 Prevent backflow or backsiphonage at each point of use in a water supply system by installing an approved backflow device. -P Observed no backflow device at mop sink.
Verification Required. |