|
16
|
1.50
|
Food-contact surfaces: cleaned & sanitized |
Yes |
No
|
No |
4-602.11 (C ) Equipment food contact surfaces and utensils shall be cleaned, and sanitized per 4-702.11/4-703.11, throughout the day at least every 4 hours, unless otherwise indicated in the Food Code, P. Observed melter trays and fryer baskets that cleaned once a day per PIC. CDI-PIC removed trays and fryers baskets and swapped with cleaned equipment.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: Sanitizing Solutions - https://youtu.be/ykP2mr9CtRg , How to Test Sanitizer https://youtu.be/y0SjmnabFaY , and Cleaning and Sanitizing Food Contact Surfaces https://youtu.be/av1Rbh-lh08 . |
|
39
|
0
|
Contamination prevented during food preparation, storage & display |
No |
No
|
No |
3-305.11 Store food in a clean, dry location, not exposed to contamination. Keep at least 6 inches above the floor. Observed unopened box of chicken stored on WIF floor. PIC moved floor to WIF shelf. |
|
41
|
0
|
Wiping cloths: properly used & stored |
No |
No
|
No |
3-304.14(B) Hold in-use wiping cloths in properly concentrated sanitizer between uses. Observed one bucket of sanitizer holding in use wiping clothes that tested at 50 ppm. PIC refilled sanitizer at 200 ppm. |
|
44
|
0
|
Utensils, equipment & linens: properly stored, dried & handled |
No |
No
|
No |
4-901.11(A) Air dry equipment and utensils after cleaning and sanitizing. Observed several stacks of metal containers wet stacked in left side of drying rack above the wash basin of the 3 compartment sink. PIC separated metal containers to properly air dry. |
|
49
|
0.50
|
Non-food contact surfaces clean |
No |
Yes
|
No |
4-601.11(C ) Keep non food contact surfaces of equipment clean to avoid build up of dust, food residue or debris.4-602.13 Non food contact surfaces of equipment shall be cleaned frequently to preclude accumulation of soil residues. Observed heavy food build up on the non-food contact surfaces of inside melters, under melters, and inside hot cabinet back walls and racks inside hot cabinet. REPEAT. |