|
47
|
0
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
4-501.11 Maintain equipment in good repair. -Observed heavy rust on shelves in tall reach-in cooler. Observed containers of food stored on shelves without covers to prevent contamination.
4-501.12 Resurface or replace cutting surfaces that can no longer be effectively cleaned and sanitized. -Observed cutting board surface on prep top with visible dark coloring within cutting grooves.
4-101.19/4-202.16 Non FOOD-CONTACT SURFACES of EQUIPMENT that are exposed to splash, spillage, or other FOOD soiling or that require frequent
cleaning shall be constructed of a CORROSION-RESISTANT, nonabsorbent, and SMOOTH material. NonFOOD-CONTACT SURFACES shall be free of unnecessary ledges, projections, and crevices, and designed and constructed to allow easy cleaning and to facilitate maintenance. -Observed cardboard using a shelf liner in walk-in-freezer. Replace cardboard with non-absorbent and easily cleanable surface. |
|
49
|
1
|
Non-food contact surfaces clean |
No |
Yes
|
No |
4-601.11(C ) Keep non food contact surfaces of equipment clean to avoid build up of dust, food residue or debris.4-602.13 Non food contact surfaces of equipment shall be cleaned frequently to preclude accumulation of soil residues. -Observed buildup of food debris and residue along equipment (exterior surface of rice steamers, door handles of low reach-in coolers). Increase frequency of cleaning. |
|
55
|
0
|
Physical facilities installed, maintained & clean |
No |
No
|
No |
6-501.12 Floors, walls, ceilings including the attachments such as soap, towel dispensers; light fixtures; and heat/ac vent covers shall be clean. Caution should be used to minimize food exposure. -Observed floors in walk-in-cooler and walk-in-freezer with accumulation of dark material. |