|
16
|
1.50
|
Food-contact surfaces: cleaned & sanitized |
Yes |
No
|
No |
4-602.11 (A) (4) Food contact surface of a thermometer shall be cleaned, and sanitized per 4-702.11/4-703.11, before using or storing. P. Observed food thermometer stored in cup located in WIC stored unclean and not in-use. PIC stated food employees bring sanitizer wipe with them prior to use. CDI- PIC removed food therm to be cleaned and sanitized. |
|
33
|
0
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
No
|
No |
3-501.15 Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths and active stirring. Cold air must flow around product to remove the heat. -Pf. Observed cobb salad cooling at .04F/min in WIC due to being stacked with tightly fitted lids. CDI- EHS discussed effective cooling methods, PIC removed lids from containers and spaced them out.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Cooling Food Safely https://youtu.be/P6x8b1ZVOxU . |
|
47
|
0
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
4-501.11 Maintain equipment in good repair. Observed gaskets on 3D prep unit torn. Replaced gaskets. |
|
49
|
0
|
Non-food contact surfaces clean |
No |
No
|
No |
4-601.11(C ) Keep non food contact surfaces of equipment clean to avoid build up of dust, food residue or debris.4-602.13 Non food contact surfaces of equipment shall be cleaned frequently to preclude accumulation of soil residues. Observed gaskets on low 2D RICs, 2D RIF, and thawing standing RICs unclean with black build up accumulation. Areas between equipment located by WIF with heavy residue accumulation. Increase cleaning frequency. |