|
2
|
1
|
Certified Food Protection Manager |
No |
Yes
|
No |
2-102.12 (A) PIC shall demonstrate knowledge by being a certified food protection manager.
Observed no Certified Food Protection Manager on site during inspection. Ensure CFPM is on site during all hours of food preparation and handling.
Repeat. 1 pt.
For more information on becoming a certified food protection manager please visit: www.mecknc.gov/foodsafety |
|
24
|
0
|
Time as a Public Health Control; procedures & records |
Yes |
No
|
No |
3-501.19 (A) (1) Written procedures for Time as a Public Health Control shall be prepared in advance, maintained in the establishment, and made available for the Health Department upon request. Written TPHC procedures must specify methods of compliance with 3-501.19 (B) or (C). -Pf.
Observed TPHC procedures on kitchen door heavily damaged and illegible during inspection.
CDI - REHS provided new form. Procedures filled out during inspection.
0 pts.
TPHC procedure template may be found at: www.mecknc.gov/foodsafety |
|
40
|
1
|
Personal cleanliness |
No |
Yes
|
No |
2-402.11 Use head coverings, beard guards and clothing to restrain body hair from contacting exposed food, equipment, and utensils.
Observed employee void of proper hair restraint during inspection. Ensure all employees that prepare customer food and beverages don proper hair restraints.
Repeat. 1 pt. |
|
47
|
0
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
Yes
|
No |
4-101.19/4-202.16 Non FOOD-CONTACT SURFACES of EQUIPMENT that are exposed to splash, spillage, or other FOOD soiling or that require frequent
cleaning shall be constructed of a CORROSION-RESISTANT, nonabsorbent, and SMOOTH material. NonFOOD-CONTACT SURFACES shall be free of unnecessary ledges, projections, and crevices, and designed and constructed to allow easy cleaning and to facilitate maintenance.
Observed unsealed piece of wood on wall in back storage area during inspection. Sealing or removal necessary.
Repeat. 0 pts. |
|
48
|
0.50
|
Warewashing facilities: installed, maintained & used; test strips |
No |
No
|
No |
4-603.16 Washed utensils and equipment shall be rinsed prior to sanitizing.
Observed employee remove item from wash basin and place directly into sanitizer basin without rinsing with clean water in between. Ensure all equipment and utensils are properly rinsed in between being washed and sanitized.
0.5 pts. |
|
55
|
0
|
Physical facilities installed, maintained & clean |
No |
No
|
No |
6-501.11 Floors, walls, and ceilings including the attachments such as soap and towel dispensers; light fixtures; and heat/ac vents shall be maintained in good repair.
Observed various cracked or chipped floor tiles in back prep area. Observed back wall damaged and missing paint in various areas. Repair and/or replacement necessary.
0 pts. |