|
|
| CDI=Corrected During Inspection | |
R=Repeat Violation | |
VR=Verification Required | |
|
|
| Violation Item
| Demerits
| Violation Description
| CDI | R | VR |
|
|---|
|
16
|
1.50
|
Food-contact surfaces: cleaned & sanitized |
No |
No
|
No |
4-501.114 Maintain sanitizer at correct concentrations when being used to sanitize. -P Observed low temp dish machine sanitizer concentration at 0ppm. PIC called repair company. Facility is to use a tub of sanitizer to sanitize dishes after cleaning with dish machine. EHS will verify within 3 days.
For more information please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: Sanitizing Solutions - https://youtu.be/ykP2mr9CtRg and How to Test Sanitizer https://youtu.be/y0SjmnabFaY
4-601.11(A) Equipment food contact surfaces and utensils shall be clean to sight and touch. -Pf. Observed ladles with black residue that left behind debris on sanitizing wipe stored as clean. CDI- PIC put ladles in dish area to be soaked and rewashed to remove residue.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: Sanitizing Solutions - https://youtu.be/ykP2mr9CtRg , How to Test Sanitizer https://youtu.be/y0SjmnabFaY , and Cleaning and Sanitizing Food Contact Surfaces https://youtu.be/av1Rbh-lh08 . |
|
44
|
0.50
|
Utensils, equipment & linens: properly stored, dried & handled |
Yes |
No
|
No |
4-901.11(A) Air dry equipment and utensils after cleaning and sanitizing. Observed metal and plastic container stacked wet on drying rack. CDI- PIC separated containers to promote air drying. |
|
47
|
0
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
4-501.11 Maintain equipment in good repair. Observed shelving units in downstairs dish area with heavy rusting. |
|
48
|
0.50
|
Warewashing facilities: installed, maintained & used; test strips |
Yes |
No
|
No |
4-501.19 During manual warewashing, maintain the wash solution at a minimum of 110F or as otherwise allowed by the detergent manufacturer label. -Pf Observed manual warewashing solution at 105F. CDI- PIC added more hot water and was above 110F. |
|
55
|
0
|
Physical facilities installed, maintained & clean |
No |
No
|
No |
6-501.11 Floors, walls, and ceilings including the attachments such as soap and towel dispensers; light fixtures; and heat/ac vents shall be maintained in good repair. Observed grout throughout kitchen missing or low in areas subject to heavy foot traffic. Repair. |
|