|
16
|
1.50
|
Food-contact surfaces: cleaned & sanitized |
Yes |
No
|
No |
4-601.11(A) Equipment food contact surfaces and utensils shall be clean to sight and touch. -Pf. For more information please visit: http://meck.co/FoodSafety or view our training videos at the following weblinks: Sanitizing Solutions - https://youtu.be/ykP2mr9CtRg , How to Test Sanitizer https://youtu.be/y0SjmnabFaY , and Cleaning and Sanitizing Food Contact Surfaces https://youtu.be/av1Rbh-lh08 . - Observed pans stored as clean with food debris in them. Corrected during the inspection (CDI) - pans were removed and placed in dish machine area. |
|
39
|
0
|
Contamination prevented during food preparation, storage & display |
Yes |
No
|
No |
3-307.11 Protect food from contamination sources not specifically noted by the code. - Observed bottom of pan stored directly on top of meatloaf. CDI - Pan was removed. |
|
44
|
1
|
Utensils, equipment & linens: properly stored, dried & handled |
No |
No
|
No |
4-901.11(A) Air dry equipment and utensils after cleaning and sanitizing. - Observed clean pans wet stacked during the inspection. |
|
47
|
1
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
4-202.11 Multiuse food contact surfaces shall be smooth, free of open seams, cracks, chips, pits, sharp internal angles, crevices and assembled to allow access to clean. -Pf - Observed cutting boards with deep grooves. Needs to be repaired.
4-501.11 Maintain equipment in good repair.- Observed torn gaskets on reach-in equipment. Needs to be replaced. |
|
49
|
1
|
Non-food contact surfaces clean |
No |
No
|
No |
4-601.11(C ) Keep non food contact surfaces of equipment clean to avoid build up of dust, food residue or debris. 4-602.13 Non food contact surfaces of equipment shall be cleaned frequently to preclude accumulation of soil residues. - Observed build up on shelving during the inspection. Needs to be cleaned. |
|
55
|
1
|
Physical facilities installed, maintained & clean |
No |
No
|
No |
6-101.11/6-201.11 Floors, walls and ceilings shall be designed, constructed, and installed so they are smooth and easily cleanable. Floors shall be non-absorbent in areas subject to moisture. - Observed floor tile in need of repair near the dish machine and the wall near the dish machine. |