|
16
|
3
|
Food-contact surfaces: cleaned & sanitized |
Yes |
Yes
|
No |
-REPEAT- 4-602.11 (A) (5) Equipment food contact surfaces and utensils shall be cleaned, and sanitized per 4-702.11/4-703.11, at any time during the when contamination may have occurred. P. Observed the underside of the slicer blade accumulating dry food debris. CDI - PIC disassembled and took parts of slicer to the warewashing area.
For more information please visit: http://meck.co/FoodSafety or view our training videos at the following weblinks: Sanitizing Solutions - https://youtu.be/ykP2mr9CtRg , How to Test Sanitizer https://youtu.be/y0SjmnabFaY , and Cleaning and Sanitizing Food Contact Surfaces https://youtu.be/av1Rbh-lh08 . |
|
28
|
0
|
Toxic substances properly identified stored & used |
Yes |
No
|
No |
7-204.11 Provide sanitizer at correct concentrations, diluting as required.-P Observed disinfectant being used for prep tables. Discussion with the PIC on following manufacturers instructions on where to use. Provide a sanitizer. CDI - Faciity has quat, utilize this for food contact surfaces. |
|
43
|
0
|
In-use utensils: properly stored |
No |
No
|
No |
3-304.12 (B) In-use utensils for food that is not TCS must be stored with their handles above the top of the food within containers or equipment that can be closed. Observed ice scoop submerged in the ice in the ice machine. |
|
47
|
0
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
4-501.11 Maintain equipment in good repair. Observed paper towel dispenser not functioning. Repair. |
|
49
|
0.50
|
Non-food contact surfaces clean |
No |
Yes
|
No |
4-601.11(C ) Keep non food contact surfaces of equipment clean to avoid build up of dust, food residue or debris.4-602.13 Non food contact surfaces of equipment shall be cleaned frequently to preclude accumulation of soil residues. Observed plastic bins used to stored clean utensils with food debris. Clean and maintain. |
|
55
|
0
|
Physical facilities installed, maintained & clean |
No |
No
|
No |
6-101.11/6-201.11 Floors, walls and ceilings shall be designed, constructed, and installed so they are smooth and easily cleanable. Floors shall be non-absorbent in areas subject to moisture. Observe floor seal coming up on floors especially at dish area. Observed low grout areas in kitchen. Observed missing/cracked baseboard tiles by walk-in cooler and walk-in freezer. Baseboard tiles have been replaced in some areas. Facility in the process of working on other areas of repair. Points not escalated due to imporovement. |