|
|
| CDI=Corrected During Inspection | |
R=Repeat Violation | |
VR=Verification Required | |
|
|
| Violation Item
| Demerits
| Violation Description
| CDI | R | VR |
|
|
18
|
0
|
Proper cooling time and temperatures |
Yes |
No
|
No |
3-501.14(A) Quickly cool cooked foods within 2 hours from 135F to 70F; and within a total of 6 hours from 135F to 45F. -P Lima beans, chicken n' dumplings, and yams still cooling from last night in walk in cooler. CDI - All discarded. |
|
19
|
1.50
|
Proper hot holding temperatures |
No |
Yes
|
No |
3-501.16(A)(1) Maintain TCS foods in hot holding at 135F or above. -P Sausage patties holding below 135F in pan on grill top. CDI - Reheated to 165F+. |
|
31
|
0.50
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
Yes
|
No |
3-501.15 Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths and active stirring. Cold air must flow around product to remove the heat. -Pf Lima beans, chicken n' dumplings, and yams cooling in thick portions while tightly wrapped in walk in cooler. CDI - All discarded due to cooling time violation (see 18). |
|
42
|
0
|
Utensils, equipment and linens: properly stored, dried and handled |
No |
No
|
No |
4-901.11(A) Air dry equipment and utensils after cleaning and sanitizing. White plastic buckets wet stacked on drying rack. Separate to allow air drying. |
|
45
|
1
|
Equipment, food and non-food-contact surfaces approved; cleanable, properly designed, constructed and used |
No |
Yes
|
No |
4-501.11 Maintain equipment in good repair. Replace shelves with chipping paint and heavy rust in walk in cooler. Improvement noted from last inspection. |
|
47
|
0.50
|
Non-food-contact surfaces clean |
No |
Yes
|
No |
4-601.11(C )/4-602.13 Keep the equipment clean to avoid build up of dust, food residue or debris. Clean splatters from inside microwave and minor build up from walk in cooler shelves. Improvement noted from last inspection. |
|
53
|
1
|
Physical facilities installed, maintained and clean |
No |
Yes
|
No |
6-201.11 Floors, walls and ceilings shall be designed, constructed, and installed so they are smooth and easily cleansable. Repair missing grout between floor tiles near dish area. |
|