|
22
|
1.50
|
Proper cold holding temperatures |
Yes |
No
|
No |
3-501.16(A)(2) Maintain TCS foods in cold holding at 41F or less. -P 3 pitchers of salsas in small sandwich cooler measured 48-52F. Cut tomatoes in sandwich cooler top measured 47F. TCS foods in cold holding shall measure 41F or less. CDI - PIC moved items to walk-in cooler to cool.
For more information, please visit: www.mecknc.gov/foodsafety or view our training videos at the following weblinks: What are TCS Foods https://www.youtube.com/watch?v=q0iLZb7v0UM and Safe Food Temperatures https://youtu.be/tXP09IK-1TQ . |
|
33
|
1
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
Yes
|
No |
3-501.15 Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths and active stirring. Cold air must flow around product to remove the heat. -Pf Salsa was cooling at 151F un walk-in cooler in large and deep container. Use shallow pans or ice bath with frequent stirring to cool TCS foods fryer cooking. CDI - Employee moved salsa to ice bath. REPEAT
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Cooling Food Safely https://youtu.be/P6x8b1ZVOxU . |
|
44
|
1
|
Utensils, equipment & linens: properly stored, dried & handled |
No |
Yes
|
No |
4-903.11 (B) After cleaning and sanitizing, clean equipment and utensils shall be stored in a self-draining position that allows air drying and covered or inverted. Several stacks of pans on clean dish shelf were stacked while they were still wet. Allow utensils to air dry before stacking. REPEAT |
|
47
|
1
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
Yes
|
No |
4-501.11 Maintain equipment in good repair. Replace torn gasket on walk-in cooler door. Walk-in cooler door is damaged. Walk-in freezer door does not close properly. Shelves in walk-in cooler are beginning to rust. REPEAT |
|
55
|
0.50
|
Physical facilities installed, maintained & clean |
No |
Yes
|
No |
6-101.11/6-201.11 Floors, walls and ceilings shall be designed, constructed, and installed so they are smooth and easily cleanable. Floors shall be non-absorbent in areas subject to moisture. Repair floors where tiles are damaged or missing. REPEAT |