|
31
|
0.50
|
Proper cooling methods used; adequate equipment for temperature control |
No |
No
|
No |
3-501.15 Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths and active stirring. Cold air must flow around product to remove the heat. -Pf Observed cut tomatoes cooling above cooling grid at beginning of inspection. CDI - PIC placed these and raw salmon that was also cooling in pan down in cooling grid. -.5- |
|
41
|
0.50
|
In-use utensils: properly stored |
No |
No
|
No |
3-304.12 Store in-use utensils in a clean, dry place, in food with handles out, in 135F or greater water or in running water which quickly moves food particles to the drain. Observed three knives used to cut lemons at wait station stored between soiled wall and back side of shelf. -.5- |
|
45
|
2
|
Equipment, food and non-food-contact surfaces approved; cleanable, properly designed, constructed and used |
No |
Yes
|
No |
4-501.11 Maintain equipment in good repair. Observed rusting in bottom of walk in freezer and bottom of reach in freezer. REPEAT -2-
4-202.11 Food contact surfaces shall be smooth, free of open seams, cracks, chips, pits, sharp internal angles, crevices and assembled to allow access to clean. -Pf Observed pitted metal pan used for food service. CDI - PIC voluntarily discarded. |
|
46
|
0.50
|
Warewashing facilities: installed, maintained and used; test strips |
No |
No
|
No |
4-501.14 Warewashing Equipment, Cleaning Frequency - C Clean a warewashing machine at least once every 24 hours. Observed buildup on the ceiling and in corners inside dish machine. -.5- |
|
47
|
0
|
Non-food-contact surfaces clean |
No |
No
|
No |
4-601.11(C )/4-602.13 Keep the equipment clean to avoid build up of dust, food residue or debris. Observed heavy buildup on exhaust fan above drying shelf for clean dishes. -0- |