|
16
|
0
|
Food-contact surfaces: cleaned & sanitized |
Yes |
No
|
No |
4-703.11(B) After being cleaned in a mechanical dish machine, equipment food-contact surfaces and utensils shall be sanitized in the dish machine by achieving a utensil surface temperature of 160F as measured by an max/min thermometer.-P. Observed the heat sanitizing dish machine is reaching a max temp of 159F. CDI - Ran another time and temp went to 172F during the rinse cycle. Ensure you utilize your thermoplate to check max temp for sanitizing.
For more information please visit: http://meck.co/FoodSafety or view our training video at the following weblink: Cleaning and Sanitizing Food Contact Surfaces https://youtu.be/av1Rbh-lh08 . |
|
55
|
0.50
|
Physical facilities installed, maintained & clean |
No |
Yes
|
No |
6-501.12 Floors, walls, ceilings including the attachments such as soap, towel dispensers; light fixtures; and heat/ac vent covers shall be clean. Caution should be used to minimize food exposure. Observed interior of cabinets and drawers at front service area accumulating food debris and residue. Clean and maintain. -REPEAT- |
|
56
|
0
|
Meets ventilation & lighting requirements; designated areas used |
Yes |
No
|
No |
6-403.11 (A)Areas designated for employees to eat and drink, shall be located so that food, equipment, linens, single service/use items are protected from contamination. Observed employee food and drink stored on the top shelf in the reach in cooler. CDI - employee food relocated to the bottom shelf. |