|
|
| CDI=Corrected During Inspection | |
R=Repeat Violation | |
VR=Verification Required | |
|
|
| Violation Item
| Demerits
| Violation Description
| CDI | R | VR |
|
|---|
|
16
|
0
|
Food-contact surfaces: cleaned & sanitized |
Yes |
No
|
No |
4-601.11(A) Equipment food contact surfaces and utensils shall be clean to sight and touch. -Pf. For more information please visit: http://meck.co/FoodSafety or view our training videos at the following weblinks: Sanitizing Solutions - https://youtu.be/ykP2mr9CtRg , How to Test Sanitizer https://youtu.be/y0SjmnabFaY , and Cleaning and Sanitizing Food Contact Surfaces https://youtu.be/av1Rbh-lh08 . Observed can opener spike with buildup, in need of cleaning. CDI- can opener removed from prep table, washed/rinsed/sanitized during inspection. |
|
22
|
1.50
|
Proper cold holding temperatures |
Yes |
No
|
No |
3-501.16(A)(2) Maintain TCS foods in cold holding at 41F or less. -P For more information please visit: http://meck.co/FoodSafety or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Safe Food Temperatures https://youtu.be/tXP09IK-1TQ . Observed sushi products holding above 41F during inspection, see temperature chart. EHS found that unit was holding at proper temperature, issue appeared to be in process of rolling sushi, cooling sushi and placing into cold holding. Observed salmon holding above 41F inside prep unit, PIC at sushi area stated this product was just cut and placed directly into unit. Observed cheese holding above 41F at pizza area, EHS found that products had been left out briefly during lunch rush. CDI- all products brought to walk in cooler to properly cool to 41F or below before placing into cold holding. |
|
33
|
0.50
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
No
|
No |
3-501.15 Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths and active stirring. Cold air must flow around product to remove the heat. -Pf For more information please visit: http://meck.co/FoodSafety or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Cooling Food Safely https://youtu.be/P6x8b1ZVOxU . Observed soups in cooling process in walk in that were tightly wrapped with plastic, needs to be unwrapped to allow for proper air flow. EHS found that products cooling are placed below products that have finished cooling, avoid placing hot product under cold product during cooling process. CDI- cold soup moved, product unwrapped for proper cooling. |
|
41
|
0.50
|
Wiping cloths: properly used & stored |
No |
No
|
No |
3-304.14(B) Hold in-use wiping cloths in properly concentrated sanitizer between uses. Observed sanitizer buckets registering around 50ppm when tested. |
|
44
|
0
|
Utensils, equipment & linens: properly stored, dried & handled |
No |
No
|
No |
4-901.11(A) Air dry equipment and utensils after cleaning and sanitizing. Observed a few wet stacks of plastic containers. |
|
47
|
0
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
4-501.12 Resurface or replace cutting surfaces that can no longer be effectively cleaned and sanitized. Observed cutting boards with deep grooves, in need of resurfacing or replacing. |
|
51
|
0
|
Plumbing installed; proper backflow devices |
No |
No
|
No |
5-205.15 Maintain a plumbing system in good repair. Observed prep sink with a slow leak at faucet. |
|