|
33
|
0.50
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
No
|
No |
3-501.15 Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths and active stirring. Cold air must flow around product to remove the heat. -Pf For more information please visit: http://meck.co/FoodSafety or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Cooling Food Safely https://youtu.be/P6x8b1ZVOxU. - Observed two bags of shredded cheese, tightly packaged pork, and tightly packaged cheese all attempting to cool. CDI- PIC moved items to walk in and walk in freezer spread out to cool. |
|
34
|
0.50
|
Plant food properly cooked for hot holding |
Yes |
No
|
No |
3-401.13 Cook plant food to a minimum of 135F when the food will be moved to hot holding. -Pf- Observed sweet potato fries reheated to 127F. CDI- PIC put item back into reheating process to hit at least 135F. |
|
35
|
0
|
Approved thawing methods used |
Yes |
No
|
No |
3-501.13 (A), (B), (C ) Use approved thawing methods. Pf- Observed raw ground beef at 43-45F and said to have been thawing over night. CDI- PIC moved item to freezer to quickly cool. |
|
47
|
0
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
4-501.11 Maintain equipment in good repair. 4-101.19/4-202.16 Non FOOD-CONTACT SURFACES of EQUIPMENT that are exposed to splash, spillage, or other FOOD soiling or that require frequent cleaning shall be constructed of a CORROSION-RESISTANT, nonabsorbent, and SMOOTH material. NonFOOD-CONTACT SURFACES shall be free of unnecessary ledges, projections, and crevices, and designed and constructed to allow easy cleaning and to facilitate maintenance. - Observed non food contact dish machine trays damaged with deep grooves and cuts. Replace or repair as needed. |
|
51
|
0
|
Plumbing installed; proper backflow devices |
Yes |
No
|
No |
5-202.14 Prevent backflow or back siphonage prevention devices installed shall meet American Society of Sanitary Engineering standards. -P- Observed nozzle attached to a back flow prevention device not rated for continuous pressure or verifiable to be rated for such continuous pressure, near dish machine. Hose was on for continuous pressure. CDI- PIC removed nozzle. |
|
56
|
0
|
Meets ventilation & lighting requirements; designated areas used |
No |
No
|
No |
6-305.11/6-501.110 Designate and use an area for the orderly storage of employees' clothing and possessions. - Observed employee food stored above retail items in cold hold reach in near service line. CDI- PIC voluntarily discarded the items. |