|
18
|
1.50
|
Proper cooling time and temperatures |
No |
No
|
No |
3-501.14(A) Quickly cool cooked foods within 2 hours from 135F to 70F; and within a total of 6 hours from 135F to 45F. -P Observed slaw cooling at insufficient rate to meet cooling parameters. CDI cooling method changed. |
|
20
|
0
|
Proper cold holding temperatures |
No |
No
|
No |
3-501.16(A)(2) Maintain TCS foods in cold holding at 45F or less. -P Observed numerous items above new required 41 degree cold holding temperature. -0 points- |
|
31
|
0.50
|
Proper cooling methods used; adequate equipment for temperature control |
No |
No
|
No |
3-501.15 Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths and active stirring. Cold air must flow around product to remove the heat. -Pf Observed slaw cooling in too great of quantity and tightly covered . CDI moved to more pans and shallower pans and proper cooling was achieved. |
|
45
|
1
|
Equipment, food and non-food-contact surfaces approved; cleanable, properly designed, constructed and used |
No |
No
|
No |
4-501.11 Maintain equipment in good repair. Observed numerous pieces of equipment in need of gasket replacement. |
|
47
|
0.50
|
Non-food-contact surfaces clean |
No |
No
|
No |
4-601.11(C )/4-602.13 Keep the equipment clean to avoid build up of dust, food residue or debris. Observed general cleaning need on faces of equipment and between and behind equipment as well as shelving in walk in. |
|
53
|
1
|
Physical facilities installed, maintained and clean |
No |
No
|
No |
6-501.11 Floors, walls, and ceilings including the attachments such as soap and towel dispensers; light fixtures; and heat/ac vents shall be maintained in good repair. Observed tiles in dish area in need of repair as well as canwash. |