|
14
|
0
|
Food-contact surfaces: cleaned and sanitized |
Yes |
No
|
No |
4-602.11 Clean the equipment and utensils used with nonTCS foods as required to avoid contamination. Dark build up visible behind deflector inside ice machine. CDI - Cleaned during the inspection. |
|
31
|
0
|
Proper cooling methods used; adequate equipment for temperature control |
No |
No
|
No |
3-501.15 Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths and active stirring. Cold air must flow around product to remove the heat. -Pf Tomato salad cooling in deli display. CDI - Relocated to walk in freezer for rapid cool down. |
|
45
|
2
|
Equipment, food and non-food-contact surfaces approved; cleanable, properly designed, constructed and used |
No |
Yes
|
No |
4-501.11 Maintain equipment in good repair. Replace split gasket on low prep cooler by flat top grill; also, replace shelves with rust in walk in cooler. |
|
47
|
1
|
Non-food-contact surfaces clean |
No |
Yes
|
No |
4-601.11(C )/4-602.13 Keep the equipment clean to avoid build up of dust, food residue or debris. Clean build up from walk in cooler shelves and low prep cooler door gaskets. |
|
53
|
0
|
Physical facilities installed, maintained and clean |
No |
No
|
No |
6-502.12 Floors, walls, ceilings including the attachments such as soap, towel dispensers; light fixtures; and heat/ac vent covers shall be clean. Caution should be used to minimize food exposure. Clean wall behind wire shelving in dry goods area. |