|
43
|
0.50
|
In-use utensils: properly stored |
Yes |
No
|
No |
3-304.12 (C ) Store in-use utensils on a clean portion of the food preparation table or cooking equipment. The utensils and storage surface must be cleaned and sanitized every 4 hours. - Observed knife stored in a dirty location between flip top lid and side of prep unit. Do not store here due to surface not being cleaned every 4 hours. - CDI - PIC moved knife to three compartment sink to be cleaned. |
|
47
|
0.50
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
4-101.19/4-202.16 Non FOOD-CONTACT SURFACES of EQUIPMENT that are exposed to splash, spillage, or other FOOD soiling or that require frequent cleaning shall be constructed of a CORROSION-RESISTANT, nonabsorbent, and SMOOTH material. NonFOOD-CONTACT SURFACES shall be free of unnecessary ledges, projections, and crevices, and designed and constructed to allow easy cleaning and to facilitate maintenance. - Observed unsealed wooden planks used to stand on along the cook line. Raw wood is absorbent and not an approved surface for equipment or flooring. Seal wood or remove from facility. |
|
55
|
0
|
Physical facilities installed, maintained & clean |
No |
No
|
No |
6-501.12 Floors, walls, ceilings including the attachments such as soap, towel dispensers; light fixtures; and heat/ac vent covers shall be clean. Caution should be used to minimize food exposure. - Observed black buildup on walls near dish machine area. Clean and increase cleaning frequency to maintain clean. Replace FRP board if unable to clean. |