|
2
|
1
|
Certified Food Protection Manager |
No |
Yes
|
No |
2-102.12 (A) PIC shall demonstrate knowledge by being a certified food protection manager. No employee present with active ANSI food protection manager certification. At least 1 employee with active certification shall be present during all hours of operation. REPEAT
For more information on becoming a certified food protection manager please visit: www.mecknc.gov/foodsafety |
|
47
|
0
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
4-501.11 Maintain equipment in good repair. Shelves chipping/rusted in upright cooler. Replace rusted shelves. 0 pts. |
|
49
|
1
|
Non-food contact surfaces clean |
No |
Yes
|
No |
4-601.11(C ) Keep non food contact surfaces of equipment clean to avoid build up of dust, food residue or debris.4-602.13 Non food contact surfaces of equipment shall be cleaned frequently to preclude accumulation of soil residues. Buildup on insides of refrigeration, shelves, exteriors of cooking equipment, etc. Clean these areas more frequently. REPEAT |
|
55
|
1
|
Physical facilities installed, maintained & clean |
No |
Yes
|
No |
6-101.11/6-201.11 Floors, walls and ceilings shall be designed, constructed, and installed so they are smooth and easily cleanable. Floors shall be non-absorbent in areas subject to moisture. Some cracked floor tiles in various areas of kitchen. Repair damaged floor. // 6-501.12 Floors, walls, ceilings including the attachments such as soap, towel dispensers; light fixtures; and heat/ac vent covers shall be clean. Caution should be used to minimize food exposure. Grease buildup on floors and walls around cooking equipment. Cleaning needed on floors and walls underneath and behind equipment throughout kitchen. Clean physical facilities more frequently. REPEAT |